Savin 9350. (photocopier) (Evaluation)

Distributor Savin Corporation, Stamford, CT Manufacturer: Ricoh Corporation, Made in Japan Suggested retail price: $5,765; $11,965 as tested with the optional ARDF ($2,045), Duplexer/ Overlay ($1,415), 2,500-sheet Large-Capacity Tray ($825) and 20-Bin "Midi" Sorter ($1,915). Manufacturer's recommended monthly copying volume: Up to 40,000 copies. BLI's recommended monthly copying volume for optimum performance: 10,000 to 40,000 copies. Test period duration: 120,000 copies in 12 weeks. Type: Desktop, stationary flatbed exposing unit, bond sheet paper, Savin's Image Injection system, dual cassette system, heat fusing. Maximum image size: 10-27/32" x 16-7/8". Makes copies from 5-1/2" x 8-1/2" to 1" x 17". Void area: There are void areas of 1/8" along the leading edge and 5/32" across the top edge of the copies. Features: Quantity selector: Makes 1-999 copies. Quantity display: Three-digit LED display counts up as copies are produced and holds the quantity selected. Quantity reset: Sixty seconds after the l copy is made, the display resets to "1" and all selected features reset to power-up settings (can al programmed by service for 5 minutes or no reset). Stack-feed bypass: Built-in stack-feed bypass hold up to 20 sheets. Duplexing: Optional duplex unit will automatically duplex up to 50 sheets ranging i size from 5-1/2" x 8-1/2" to 11" x 17". Document Feeder: Optional Automatic Reversing Document Feeder (ARDF) measures the size of the original and selects the most appropriate paper supply or reduction/enlargement ratio. Message display: An LED "Guidance Display" panel displays all the conditions of the machine using text and graphics. Reduction/Enlargement: Variable reduction/ enlargement from 64% to 150% in 1% increments. Preset reduction modes of 64%, 74% and 92%, and preset enlargement modes of 127% and 150%. A "Full Size" key is used to select size-for-size copying. The control panel is horizontally divided into three panels. The MAIN PANEL has the quantity selection numeric keypad, print quantity display, "Cancel/Stop," "Enter/Quantity Recall" and "Clear Features" keys. "On" and "Off" keys (used to activate/deactivate standby mode; "On" selection is indicated by a lit LED). Exposure controls: The exposure is controlled by two keys over a range of seven settings, plus a "High Density" key. The "Print" key has an LED indicator that changes from red ("Wait") to green ("Ready") when the copier is ready for copying. "Interrupt/ Resume" key with multicopy/multifunction capability and job memory (selection is indicated by a lit LED). When reducing/enlarging to size or editing, the …