AccessMyLibrary provides FREE access to over 30 million articles from top publications available through your library.
Create a link to this page
Copy and paste this link tag into your Web page or blog:
Differential, high-speed op amps.(Featured Products)
The LMH6550 and LMH6551 are high-performance voltage feedback differential amplifiers. The fully differential topology allows balanced inputs to the ADCs and can be used as single-ended-to-differential or used as differential-to-differential. These amplifiers also have the high speed and low distortion necessary for driving high-performance ADCs, as well as the current-handling capability to drive signals over balanced transmission lines like CAT-5 data cables. The LMH6550/51 can handle a wide range of video and data formats. With external gain set resistors, the LMH6550/51 can be used at any desired gain. Gain flexibility coupled with high speed makes these amplifiers suitable …
- New Vishay Siliconix Dual SPDT and Dual SPST Analog Switches Target Portable...
- Press release article from: Business Wire October 21, 2005 700+ words
...dual SPDT DG3516/17 switches feature a 300-MHz 3-dB bandwidth, while the dual SPST DG3537/38/39/40 switches feature a 360-MHz 3-dB bandwidth suitable for video and data-stream applications...
- Ultra-wideband, 900 MHz, voltage-feedback op amp.(Featured...
- Magazine article from: EDN February 17, 2005 700+ words
...is specified at 6.6V and 10V. Features * 900 MHz-3 dB Bandwidth ([A.sub.V] = 1) * Large signal bandwidth and slew rate 100% tested * 280 MHz-3 dB Bandwidth ([A.sub.V] = +2, [V.sub.OUT] = 2...
- Fairchild Semiconductor's New 800 MHz Video Switch Allows Full Design...
- Press release article from: Business Wire September 22, 2004 700+ words
...a high-performance Quad SPDT (2-to-1 multiplexer/demultiplexer) video switch. Its ultra-wide 800 MHz (-3 dB) bandwidth allows full design flexibility while maintaining absolute signal fidelity. The FSAV430's low-power (less...
- Commercialisation of 10.7 MHz ceramic filters. (Ceramics).(from Murata...
- Newspaper article from: New Materials Japan June 1, 2003 700+ words
...Murata Manufacturing Co Ltd has introduced a 10.7 MHz ceramic filter with a thickness of 1.0 mm or less...model providing an intermediate frequency of 10.7 MHz and a 3 dB bandwidth of 280 kHz, and then expand the product line-up...
- Performance where it counts: 1.2 GHz, low distortion op amp and 650 MHz...
- Magazine article from: EDN April 14, 2005 700+ words
...2, it supports 750 MHz at 2 Vpp -3 dB bandwidth. The LMH6704 is a programmable...buffer supporting 650 MHz small signal bandwidth...op amp features * -3 dB bandwidth ([Y.sub.OUT...3rd harmonic (20 MHz, SOT23-6) -69...
- Downconverters deliver flexible IF choices; This line of broadband frequency...
- Magazine article from: Microwaves & RF Browne, Jack August 1, 2007 700+ words
...centered at 1.2 GHz with a 3-dB bandwidth of 500 MHz. The maximum group delay for signals within 80 percent of this 3-dB bandwidth is 3 ns. The RF-to-IF gain...centered at 70, 140, and 160 MHz. The 70-MHz port offers user...
- Intersil Introduces World's First High Speed 550 MHz Triple Differential...
- Press release article from: Business Wire November 3, 2003 700+ words
...triple differential drivers available -- -3 dB bandwidth of 250 MHz and 550 MHz available -- Fully differential inputs, outputs...triple differential receivers available -- -3 dB bandwidth of 550 MHz and 250 MHz respectively -- Differential input...
- 250-MHz Operational Amplifiers Achieve -88 dBc SFDR At 5 MHZ.(Brief...
- Magazine article from: Electronic Design GAWEL, RICHARD September 18, 2000 700+ words
...4387, and 4388 single-supply, 250-MHz op amps offer an SFDR of -88 dBc at 5 MHz. These devices operate on supply voltages...supplies. Other features include a -3-dB bandwidth of 200 MHz, a slew rate of 350 V/[micro]s, and...
- Log amp features 50 dB of dynamic range for input frequencies from dc to 120...
- Magazine article from: EDN Swager, Anne Watson August 17, 1989 700+ words
...of +/-0.6 dB, and a 120-MHz bandwidth. Log amps are useful...voltage gain of 10 dB and a -3-dB bandwidth of 350 MHz. The bandwidth of all five stages together is guaranteed at 120 MHz. Two key performance features of...
- Variable-gain amplifier lowers noise and distortion but keeps bandwidth at 35...
- Magazine article from: EDN Swager, Anne Watson October 10, 1991 700+ words
...1V. The amplifiers' typical 3-dB bandwidth is 35 MHz and is essentially independent of...ratio for 1V rms outputs and a 1-MHz noise bandwidth is typically 76...The group delay is flat to 10 MHz and is stable at [+ or -] 2 nsec...
Source: HighBeam Research, Differential, high-speed op amps.(Featured Products)
Other Gale sites: Encyclopedia.com | HighBeam Research | Acquire Content | Books & Authors | Goliath | MovieRetriever | Smart QandA
The AccessMyLibrary advertising network includes:
