Pharmaceutical Processing articles from May 2003

Pharmaceutical Processing archives from May 2003

Sanitary rupture panel.
May 1, 2003... The GLPS offers a smooth surface to the process which contains no crevices, slits, or sharp products where product can accumulate. To further ensure cleanliness, the panel is installed without the addition of a separate gasket. Manufactured of...

Coating systems.
May 1, 2003... Coating systems include film, fluid bed and continuous film coating systems. Film and fluid bed coaters are available in both laboratory-scale and production scale units. Capacities range from 5 kilos to 600 kgs. All systems provide...

C[O.sub.2] incubators.
May 1, 2003... The Steri-Cult offers a large capacity and includes an external humidification system. Unit also features Class 100 HEPA filtration, on-demand heat sterilization, low velocity laminar flow, closed door monitoring of the humidity system's water...

Membrane adsorbers.
May 1, 2003... Sartobind[R] Membranes feature high flow rates with excellent dynamic binding in a ready to use, durable, disposable format that permits easy scalability from lab to production. Removal of contaminants such as DNA, endotoxin, viruses and host...

Coding validation.
May 1, 2003... Validation Package includes information such as design and functional specifications as well as standard operating procedures required to ensure consistent operation. It also outlines product performance tests that can be conducted by customers...

Post-show wrap-up. (IPIC 2003).
May 1, 2003... IPIC 2003 lived up to its reputation as the world's preeminent event for pharmaceutical professionals. This year, a total of 10,295 pharmaceutical attendees came to the event to source new technology, products, solutions and educational...

Good guidance. (Editor's Picks).
May 1, 2003... The HHS Office of Inspector General recently issued final voluntary guidance for pharmaceutical manufacturers that outlines actions they can take to promote compliance with the rules and regulations of doing business with Medicare, Medicaid and...

Gravimetric Feeder. (Editor's Picks).
May 1, 2003... The ProRate/Gravimetric Feeder features a proprietary controller that will control from 1 to 8 feeders simultaneously, providing a capacity range from 1 to 80,000 pounds per hour. Hoppers are cylindrically designed with a 60[degrees] cone to...

Tubing: plasticizer-free. (Editor's Picks).
May 1, 2003... Tygon[R] Plasticizer Free tubing is extremely flexible, and offers a long pump life. It is ideal for a range of applications including peristaltic pumps, water purification lines, and chemical transfer. The tubing will not degrade over time,...

Metering pumps: sealless diaphragm. (Editor's Picks).
May 1, 2003... E Series pumps for C[O.sub.2] process metering in super clean water-free systems feature leak-free, sealless diaphragm technology with smooth internals, no dead spaces, and low pump head volume. Pumps can handle pressures up to 17,500 psi and...

Indicator/controller: offers weight display and process control. (Editor's Picks).
May 1, 2003... The Model 1310 is a flexible weighing and process controller designed to integrate into all major industrial networks. Users can control and monitor any weight-based process, display chosen critical aspects of the operation status in graphics...

Bilayer press: designed for R&D. (Editor's Picks).
May 1, 2003... The Piccola 10-18 station bilayer tablet press is designed for R & D. This press with SMI instrumentation shortens the development process. SMI is the source for all your solid dosage requirements from research through production. Includes...

Compliance with FDA 21 CFR Part 11: how MES (Manufacturing Execution Systems) provide a new perspective on quality control. (Editor's Spotlight).
May 1, 2003... In pharmaceutical manufacturing, product quality is essential. Everything that pharmaceutical companies sell on the open market has to meet their own standards as well as the requirements of the protective authorities. Logically, quality...

Sterilization chamber analyzer: checks EtO and H2O levels. (New Products).
May 1, 2003... Analyzer provides real-time readout of EtO and H2O levels to meet FDA requirements. EtO and H2O levels inside the chamber are read concurrently and separately, gives a continuing overview of both. Along with displaying on-going readouts, the...

Corrugated plastic boxes: non-particulating and sterilizable. (New Products).
May 1, 2003... Techno-Box Boxes are non-particulating and can be sterilized by gamma radiation, and used in temperatures from -10[degrees]F to 140[degrees]F. Featuring all plastic construction, these boxes automatically set-up without glue or tape, knock-down...

Monobloc filler: wide variety of metering systems. (New Products).
May 1, 2003... The MNB 2000 series offers a wide range of metering systems and is capable of handling a large range of viscosities. Single lane models handle up to 60 containers per minute while double lane models are capable of running up to 120 containers...

Particle sizer: full regulatory compliance. (New Products).
May 1, 2003... The Zetasizer Nano uses advanced technology for simple, repeatable and accurate measurement of particle size, zeta potential and molecular weight of molecules and nano-sized particles. The series has been designed for ease-of-use, and features...

Glass vials: include popular styles and sizes. (New Products).
May 1, 2003... Glass vial stocking program includes the most popular sizes and styles for quick shipment. Vials are designed to meet the demands of high-speed filling lines, are manufactured from seamless glass tubing, cut to semi-finished lengths, and fine...

SFE/SFR processing system: modular design. (New Products).
May 1, 2003... The SFT-150 Supercritical Fluid Extraction/Reaction System was developed to investigate the feasibility of applying supercritical fluid techniques to various analyses and processing systems. The system is designed to perform extraction and run...

Instrument connection system: eliminates shutdowns. (New Products).
May 1, 2003... System allows for the removal of instruments for repair, calibration or replacement without interrupting the process flow. Unit features a fire-safe block valve and backup seat that will not burn meeting specification API 607. It comes with an...

Follower plate discharge system: redesigned with hydraulic power pack. (New Products).
May 1, 2003... The HED line eliminates the mechanical screws used on earlier models and is now driven by a single, remotely positioned hydraulic power pack, and all controls are positioned on the side of the discharge system frame. This simplified design...

Air pressure sensor: ultra-fast response time. (New Products).
May 1, 2003... The AP-40 Series ultra-small digital air pressure sensor amplifier incorporates a small and lightweight sensing element, enabling it to be mounted in a tight space or onto a suction nozzle. There are no pneumatic connections or piping length to...

IBED coated tooling helps improve tableting efficiency and productivity. (Solid Dosage).
May 1, 2003... An increasing number of manufacturers of solid dose tablets are gaining improvements in tableting efficiency and productivity by using high-performance coatings on tablet punches and dies. The coatings are designed to reduce wear and corrosion...

Arizona Instrument. (IPIC Exhibitor Profiles).
May 1, 2003... Arizona Instrument is an ISO 9001 registered company that designs, manufactures, and markets Computrac precision moisture analysis instruments used in R&D, quality control, and process control applications. We provide pre- and post-sale...

Cole-Parmer Instrument Company. (IPIC Exhibitor Profiles).
May 1, 2003... Company has offered a complete range of instruments, equipment and unmatched applications assistance since 1955. Applications Specialists assist in finding the right instrumentation, equipment, chemicals, replacement parts, and services to...

Spraying Systems Co. (IPIC Exhibitor Profiles).
May 1, 2003... Spraying Systems Co. makes spray nozzles for tablet and fluidized bed coating, 1- and 2-fluid spray drying, tank washing, gas conditioning, sanitation, washing, cleaning, atomizing, dispersing, humidifying, heating and cooling. Contract testing...

Turck Process Automation. (IPIC Exhibitor Profiles).
May 1, 2003... Turck Process Automation (TURCK PA) is a partnership of TURCK and INTERLINK BT. This union provides a complete connectivity, interface, and sensing solution for process automation needs. At Interphex 2003, TURCK PA displayed its connectivity,...

Drum Inverter: stainless steel. (IPIC Show Wrap-up).
May 1, 2003... The M2000 series Drum Inverter features stainless steel construction. The unit is available with pneumatic or electric drives. The physical dimensions and sequencing are customized to each end-user's process requirements. Meto Corporation,...

Blending System: multiple vessel. (IPIC Show Wrap-up).
May 1, 2003... The M.V.P. Blending System is a multi-functional system that features five of the company's blender geometries with the maneuverability of a post lift. The system is ideal for sanitary service and applications involving high-value products. The...

Check counter: high speed. (IPIC Show Wrap-up).
May 1, 2003... The KL50ic check counter incorporates a removable vibratory feeder for ease of cleaning, and a PC interface. A bar code scanner can be added to the system. The KL50ic maintains a counting accuracy of 99.98%, it requires no change parts or...

Tablet presses. (IPIC Show Wrap-up).
May 1, 2003... Brochure highlights the company's precision tablet press machinery, providing complete details and full-color photographs of its comprehensive line of machines and accessories. Fette America, 400 Forge Way, Rockaway, NJ 07886. Write In...

Data management system: increases data management sharing capabilities. (IPIC Show Wrap-up).
May 1, 2003... iHistorian[R] 2.0 software now features two new data collectors that accelerate the transformation of raw production data into actionable business information and enable users to share that information throughout their business and its extended...

Aseptic Connection Device: improves drug manufacturing. (IPIC Show Wrap-up).
May 1, 2003... Aseptic Connection Device (ACD) connects converging fluid paths without compromising sterility. It does not require laminar flow hoods or other capital equipment to maintain sterility. The ACD is used any time two pieces of flexible tubing need...

Tablet press: washable. (IPIC Show Wrap-up).
May 1, 2003... Company offers a self-cleaning tabletting press system with separate washing and drying cycles to speed up cleaning and change-over times. This tablet press design has been mechanically modified to perform under strict production guidelines in...

Contract services: clinical, commercial, packaging. (IPIC Show Wrap-up).
May 1, 2003... Company is a full-service provider of contract clinical and commercial manufacturing and packaging solutions for virtually all finished non-sterile solid and semi-solid dosage forms, including tablets, capsules, creams, lotions, ointments, gels...

Cross-flow filtration modules and systems: for stringent biopharmaceutical applications. (IPIC Show Wrap-up).
May 1, 2003... The Optisep-BP features an advanced fluid mechanical design of the flow channels that allows the modules to demonstrate increased cleanability. This flow channel design allows use of the entire filtration area, reducing membrane fouling and gel...

Metal detector: software complies with 21 CFR Part 11. (IPIC Show Wrap-up).
May 1, 2003... Software enables metal detection systems to deliver highly accurate inspection of tablets, capsules and granules while at the same time meeting the electronic records and signature requirements of the FDA. The software implements all security...

Air handling system: integrated. (IPIC Show Wrap-up).
May 1, 2003... ICA line of custom air handling systems feature an innovative double wall construction that provides a superior no-through-metal design in either 2.5 or 4 inch wall thickness. The unit is especially suitable for pharmaceutical applications that...

Solid dosage equipment: full range. (IPIC Show Wrap-up).
May 1, 2003... Company offers a range of tablet presses, control systems, tablet testers, batch coaters, punch and die tooling and various services. The Manesty Xpress 500 single-sided tablet press feature Mpower control and is 21 CRR Part 11 compliant and...

Silicone hose: heavy duty. (IPIC Show Wrap-up).
May 1, 2003... Sani-Tech[R] STHT-R-HD is ideal for elevated pressure applications. Hose is manufactured from Sani-TechF to 500F. Saint Gobain Performance Plastics, 3910 Industrial Dr., Beaverton, MI 48612. Write In 181--Or Reply Online ...

Tablet press: advanced control system. (IPIC Show Wrap-up).
May 1, 2003... The EA tablet press features sturdy construction and advanced electronic control systems designed to meet the requirements for small batch requirements. Unit is built to GMP specifications and is easy to clean and set-up for production. Press...

Sanitary adapter: high strength connection. (IPIC Show Wrap-up).
May 1, 2003... Metal Backed Sanitary Adapter offers a strong connection by reinforcing the plastic adapter with a stainless steel ring. This reinforcement prevents leakage and wear and tear on the connection during frequent clamp opening and closing....

Parenteral vessel: portable. (IPIC Show Wrap-up).
May 1, 2003... This 300-liter process vessel is ASME code-stamped, with a pressure rating of 300F and full vacuum. Material of construction is 316L stainless steel. The vessel's exterior finish is 35 Ra, with 10 Ra Precision Ultra 10 electropolish interior....

Check valve: vertical and horizontal. (IPIC Show Wrap-up).
May 1, 2003... The SVC/SHC Series features a springless design to ensure zero dead space and to maintain sterile conditions. Applications for the SVC/SHC Series include: WFI, purified water lines on pump outlets; condensate drainage from clean steam...

Pressure control solutions: for biotechnology and pharmaceutical manufacturing. (IPIC Show Wrap-up).
May 1, 2003... Brochure outlines the company's line of pressure regulators and electronic pressure controllers, designed for pharmaceutical and biotechnology manufacturing. In addition to product advantages, options and applications, a detailed chart includes...

Continuous level system: easy set-up and configuration. (New Products).
May 1, 2003... The ultra-wave[TM] is easy to set-up and calibrate with "quick-config", which can provide useable level information within minutes. Unit requires little or no ongoing tuning and can replace guided-dependent level sensing product if using the...

Silicone suction cups: contain no dyes for use at 600[degrees]F. (New Products).
May 1, 2003... Molded from a clear, translucent compound, these non-marking, heat-resistant suction cups come in flat-, single-, and multi-bellows styles in sizes from 5 mm to 150 mm diameter. Soft and pliable, these cups meet FDA Title 21 and the German...

Gas tight roll compactor: for oxygen-sensitive materials. (New Products).
May 1, 2003... Unit features enclosures around the compacting rolls and feeder assembly to isolate oxygen-sensitive materials from the environment. Compactor can be fabricated from stainless steel or specialty metals depending on requirements. Hosokawa...

Eluent selector: can select one of three solutions. (New Products).
May 1, 2003... The 816 IC Eluent Selector is a step gradient 3-port selector, which can select one of three solutions (eluents). Switching can be carried out manually, or automatically through Metrodata IC-Net 2.1 software. The eluent change, or step...

Pressure regulators: lightweight and compact. (New Products).
May 1, 2003... Model 206 Series regulators feature a low internal dead volume of 3.03 cc that allows for rapid purging in instrument applications, while a convoluted diaphragm provides excellent accuracy. Units are available in 316 stainless steel or brass...

Explosion proof truck: for high density storage. (New Products).
May 1, 2003... The RCTEX enables narrow aisle facilities to have high density EX storage for totes, pallets and drams. The RCTEX offers capacities to 3,000 pounds, lifting elevation in excess of 15 feet, and the capability to operate in 60" aisles. ...

Multifunctional datalogger: takes up to 15,000 measurements. (New Products).
May 1, 2003... The Hygro-Thermometer is a small, portable unit that can take up to 15,000 humidity, temperature, dew point and wet bulb measurements. Time and date stamped data is available in list or graph form using the supplied software. The meter provides...

Tamper-evident security system: for UN-certified IBC's. (New Products).
May 1, 2003... System is designed for the all-plastic Unitote intermediate bulk container to deter and prevent unauthorized access and features a polyethylene door set into the pallet base and locked with a steel bolt to block access to the discharge...

Silicone hose: with color-coded bands. (New Products).
May 1, 2003... CLEAR-mark sanitary hose features a vulcanized platinum cured silicone construction that is offered with a wide range of color band variations. Color-coded hose is ideal for separating functions, facilities, specific applications, dates of...

Relative Humidity analyzer: for measurement and control of moisture levels in gases. (New Products).
May 1, 2003... The Model MR 2350 is available in both wall and panel mount configurations. When used with the MDR3 Humidity probe, the unit is capable of rh readings in the range of 0-100% over a temperature range of -15[degrees]C to +85[degrees]C. Current...

Safety Valves: stainless steel base and disc. (New Products).
May 1, 2003... Figure 32, 42 and 42A Series Safety Valves feature a stainless steel base and disc which provides longer life, better corrosion resistance and higher set pressure ranges. Valves are ASME Section I and VIII approved and offer ragged construction...

Digital pressure controller/calibrator: high precision and stability. (News Products).
May 1, 2003... The 7259 uses an active matrix, full color screen with a large, 6.4" diagonal viewing area. Unit features two user-selectable control modes, Active mode and Passive mode. In Active mode, the unit continuously controls the set-point and corrects...

Plastic idler components: replaces metal in corrosive environments. (New Products).
May 1, 2003... Standard and custom plastic idler components eliminate the need for ball bearings and metal parts, making them ideal for applications requiring wash down or frequent exposure to corrosive materials. Components feature a variety of sheaves,...

Bulk bag filler: pneumatic feeding. (New Products).
May 1, 2003... Automated bulk bag filling system feeds material to a cantilevered, rear post bulk bag filler using a dilute phase pneumatic gain-in-weight batching system, achieving high filling rates. The filter receiver of the pneumatic conveying system is...

Gauges: option enables dry gauges to act like liquid-filled gauges. (New Products).
May 1, 2003... Gauges with PLUS! Performance resist the damaging effects of vibration and pulsation. Gauges with this option are lighter than liquid-filled and cost less to ship. In addition, gauges eliminate leak risk and eliminate the fill line inside the...

Mixing vessels: for low-viscosity liquids. (New Products).
May 1, 2003... Portable or fixed-mount propeller mixers can be incorporated into atmospheric and pressure/vacuum vessels. The strong axial flow pumping characteristics of the impeller create a flow towards the bottom of the vessel that will force the...

Controller: for liquid and gas fluid control. (New Products).
May 1, 2003... The Series 8500 Optaflow[R] controller is designed for liquid and gas fluid control in R&D, laboratory analysis, pilot plant, small batch and quality assurance applications. Engineered to provide accuracy to +/-3% of full scale standard, the...

Actuated ball valves: pneumatic and electrically actuated. (New Products).
May 1, 2003... Valves are available in direct-mounted brass and stainless steel in models ranging from 1/2" to 3" in size. Actuated valves are used to remotely control valves operating in virtually any application. Valves that are difficult to reach, or...

Vaccine production gets a shot in the arm. (IPIC Update).
May 1, 2003... In the nearly 2 years since September 11th, increasing attention has been focused on the importance of vaccines. The terrorist attacks made the potential of a bioterror incident frighteningly real, and mobilized the industry, government and the...

Thomas Engineering. (Coating Technology).
May 1, 2003... Product Line: Thomas Engineering supplies Accela-Cota tablet coating systems, available in seven standard models that can be customized to fit precise coating applications, including bottom discharge. The newly designed Accela-Cota...

Nicomac Inc. (Coating Technology).
May 1, 2003... Product Line: Nicomac Inc. is the USA sales and service organization for the Nicomatic Coating System. The NCS system can coat in the same coating pan from tablets to microgranules (pellets), it can perform with the same high efficiency...

Coating Place Inc. (Coating Technology).
May 1, 2003... Product Line: Company is a contract manufacturer specializing in pharmaceutical-grade Wurster fluid bed processing for Rx prescription, OTC, and controlled substance markets. Applications include taste/odor masking, enteric delivery, and...

Glatt Air Techniques Inc. (Coating Technology).
May 1, 2003... Product Line: Glatt offers two major types of coating systems for--Fluid Bed Coating Systems and Perforated Pan Coating Systems. The fluid bed coating line includes both top spray type coating and bottom spray coating alternatives. Glatt's...

Vector Corporation. (Coating Technology).
May 1, 2003... Product Line: Vector Corporation manufactures and markets a complete line of laboratory through production size coating pans and fluid bed processing systems for the coating of solid dosage products. Tablet coating systems are...

Texmac Inc. (Coating Technology).
May 1, 2003... Product Line: TEXMAC Inc. is an exclusive representative for Hirano Coater, which major companies around the world rely on for the reliability and quality of Hirano's patented coating processes, and Hirano's 60 year's experience. Hirano...

O'Hara Technologies. (Coating Technology).
May 1, 2003... Product Line: O'Hara Technologies offers tablet coating systems with perforated pans ranging from 36" through to 70", lab coating systems with pan sizes from 10" through to 30", including three or four interchangeable pans, tray-drying...

DRIAM USA, Inc. (Vendor profiles: coating technology).
May 1, 2003... Product Line: DRIAM offers coating equipment for the pharmaceutical, food and agricultural industries. The manufacturing program consists of lab coating units with exchangeable drams and batch capacities from 6.5 liters to 36 liters and...

Raw materials/pharmaceutical ingredients.
May 1, 2003... Included in this section of the PHARMACEUTICAL PROCESSING Buying Guide are listings of suppliers offering Raw Materials/Pharmaceutical Ingredients listed in alphabetical order within each product category. Additional information can be found...

Processing equipment. (Agglomeration Equipment-Material Handling).
May 1, 2003... Included in this section of the PHARMACEUTICAL PROCESSING Buying Guide are listings of suppliers offering Processing Equipment listed in alphabetical order within each product category. Additional information can be found within this issue on...

Processing equipment. (Milling Equipment-Sterilizer/Autoclave).
May 1, 2003... COMMINUTORS Ankalesh Pharmachem Equipments, Mumbai, Ma India Atlantic Coast Crushers, Kenilworth, NJ British Rema Manufacturing Co. Ltd., Powder Process Engineering, Chesterfield UK Fitzpatrick Company, Elmhurst, IL ...

Processing equipment. (Tableting Equipment-Washers).
May 1, 2003... COUNTERS AC Compacting LLC, North Brunswick, NJ CapPlus Technologies, Inc., Phoenix, AZ CMS Technologies, Old Tappan, NJ DI Pharma Tech, Westminster, SC Kirby Lester 470 West Avenue Stamford, CT 06902 Tel:...

Process components, supplies and instrumentation.
May 1, 2003... Included in this section of the PHARMACEUTICAL PROCESSING Buying Guide are listings of suppliers offering Process Components, Supplies and Instrumentation listed in alphabetical order within each product category. Additional information can be...

Packaging.
May 1, 2003... Included in this section of the PHARMACEUTICAL PROCESSING Buying Guide are listings of suppliers offering Packaging listed in alphabetical order within each product category. Additional information can be found within this issue on those...

Process automation.
May 1, 2003... Included in this section of the PHARMACEUTICAL PROCESSING Buying Guide are listings of suppliers offering Process Automation listed in alphabetical order within each product category. Additional information can be found within this issue on...

Clean room equipment & supplies.
May 1, 2003... Included in this section of the PHARMACEUTICAL PROCESSING Buying Guide are listings of suppliers offering Clean Room Equipment & Supplies listed in alphabetical order within each product category. Additional information can be found within this...

Lab instrumentation & QA/QC.
May 1, 2003... Included in this section of the PHARMACEUTICAL PROCESSING Buying Guide are listings of suppliers offering Lab Instrumentation & QA/QC listed in alphabetical order within each product category. Additional information can be found within this...

Services.
May 1, 2003... Included in this section of the PHARMACEUTICAL PROCESSING Buying Guide are listings of suppliers offering Services listed in alphabetical order within each product category. Additional information can be found within this issue on those...

Outsourcing/contract services.
May 1, 2003... Included in this section of the PHARMACEUTICAL PROCESSING Buying Guide are listings of suppliers offering Outsourcing/Contract Services listed in alphabetical order within each product category. Additional information can be found within this...

Manufacturers Of products for pharmaceutical processing. (Directory of Manufacturers).
May 1, 2003... A AAF International (American Air Filter), 10300 Ormsby Park Place, Suite 600, Louisville, KY 40223-6169; Tel: 502-637-0011, Fax: 502-637-0119 or 888-223-6500, Toll Free: 888-228-7007 AAI International, An AAI Pharma Company, 2320...