AccessMyLibrary provides FREE access to over 30 million articles from top publications available through your library.

Construction Equipment articles from June 2004

9,050 total articles

Magazine with information and ideas for managers of construction equipment and trucks.

Set up an RSS feed
Close Set up an RSS feed that alerts you when new articles from Construction Equipment are available.
XML Add to My Yahoo! Add to My AOL Add to Google Subscribe in NewsGator
Frequently asked questions about RSS feeds
to find out when new articles for Construction Equipment arrive.

Construction Equipment archives from June 2004

Sweetness.(Sutton Report)
June 1, 2004... A recent newspaper article blames productivity gains over the past few years for the increase in stress among workers. Fewer folks to do the same tasks have stretched workdays, shrinking the amount of time left for home life and other...

Bobcat.(Market Watch)
June 1, 2004... With a rated operating capacity of 1,300 pounds (1,400 with counterweight), the S130 skid-steer has a lift height of 109.1 inches and uses a 46-hp Kubota engine with direct injection. The auxiliary hydraulic system provides a flow of 16.9 gpm,...

New Holland.(Market Watch)
June 1, 2004... Billed as best-in-class in every category, EH Series excavators are said to have the highest breakout force and lifting capacity, plus ease of operation. The 14-ton EH130 LC is a short-radius machine, and the 16-ton EH160 LC and 21-ton EH215 LC...

JCB.(Market Watch)
June 1, 2004... JCB says the 520-40 Loadall is the most compact telescopic tool carrier on the market, measuring 61 inches wide, 77 inches high, and weighing 9,700 pounds. It has a 4,000-pound rated operating capacity (ROC) at its full lift height of 13 feet 2...

Bomag.(Market Watch)
June 1, 2004... The view to the drums, drum edges and sprinkler systems from the operator's compartment of the BW161AD-4 HF is excellent, thanks to slanted drum-support legs and frame design. This new asphalt compactor, with an operating weight of 22,000...

Komatsu.(Market Watch)
June 1, 2004... Models WB140-2N, WB140PS-2N, WB150-2N, WB150PS-2N and WB150AWS-2N) feature increased hydraulic speeds and Tier-2-compliant engines. The backhoe-loaders have operating weights ranging from 16,600 to 19,731 pounds, and offer a Load Independent...

LeeBoy.(Market Watch)
June 1, 2004... A new version of the 8515 asphalt paver has a heavier undercarriage and track assembly that uses either poly pads or continuous rubber tracks. The paver promotes efficient material flow with heavy-duty radius wings on its 7.5-ton receiving...

New Holland.(Market Watch)
June 1, 2004... Zero-tail-swing EH35 and EH45 compact excavators work well in confined spaces. The upper frame rotates 360 degrees and the boom pivots 73 degrees to the left and 58 degrees to the right. The full-circle swing allows operators to dig and dump...

Mustang.(Market Watch)
June 1, 2004... Introduction of the MTL20 brings the number of rubbertrack loaders in the company's line to three. Powered by an 81-hp engine, the unit has a rated operating capacity of 2,976 pounds when rated at 50 percent of its tip capacity. Ground pressure...

Caterpillar.(Market Watch)
June 1, 2004... The 561N Pipelayer comes equipped with an electronically controlled engine with more power and reduced emissions, new fingertip controls and improved viewing area. Although it replaces the 561M, the new model retains features such as hydraulic...

Kubota.(Market Watch)
June 1, 2004... An Intelligent Control System in the KX41-3V compact excavator provides the operator with a wealth of information. This 3,693-pound, 17-hp machine has a maximum digging depth of 7 feet 9 inches. For smooth operation, hydraulic circuits are...

Terex.(Market Watch)
June 1, 2004... Replacing the TX5119 telehandler, Model TX5519 features many enhancements and a new cab with ergonomic joystick controls. It has a 5,500-pound lift capacity, 18 feet 10 inches of lift height, and 11 feet 3 inches of forward reach. Powered by a...

Komatsu.(Market Watch)
June 1, 2004... The 69,450-pound BR380JG-I jaw crusher is designed for applications that include highway construction, demolition and quarry work. It is powered by a 180-hp Komatsu engine and, according to the company, it has a production output of 55 to 265...

Ingersoll-rand.(Market Watch)
June 1, 2004... The SD-25 is a 2.6-ton soil compactor available as either a smooth-drum (SD-25D) or padfoot model (SD-25F). The SD-25D is also available with a clamp-on padfoot shell kit. Operating weights are 5,850 and 5,920 pounds, respectively. Both models...

LeeBoy.(Market Watch)
June 1, 2004... The 25,000-pound, 130-hp, track-mounted 8816 asphalt paver is designed for roadwork and large commercial applications. It features Lee-Boy's heavy-duty, heated and vibrating Legend Screed System, and its 10-ton receiving hopper has folding...

Allmand.(Market Watch)
June 1, 2004... Powered by 36-hp Mitsubishi diesel engines, the 8435 and 8435 HST four-wheel-drive compact utility tractors offer two power-train model options. The 8435 features a synchro-shuttle shift transmission; and the 8435 HST has a hydrostatic...

Hydramaxx.(Market Watch)
June 1, 2004... Weighing 38,000 pounds, the HM2500 Chain Trencher has a digging depth from 20 inches to 7 feet and a digging width from 11 to 22 inches. The digging chain drive features hydrostatic infinite speed control. It is powered by a 350-or 400-hp...

Komatsu.(Market Watch)
June 1, 2004... Komatsu has introduced another hydrostatically driven wheel-loader, the WA150-5. The 96-hp model weighs 17,295 pounds and has a rated breakout force of 16,314 pounds. The machine's new hydrostatic transmission has a traction-control system to...

Kubota.(Market Watch)
June 1, 2004... The Ultra-Compact K008-3 hydraulic excavator easily maneuvers in small spaces. With an operating weight of only 2,200 pounds, it is designed to work in sensitive areas with minimal ground disturbance. The 10.2-hp machine has a digging depth of...

Caterpillar.(Market Watch)
June 1, 2004... Five radial-lift B-Series skid-steers (216B, 226B, 236B, 246B and 248B) have respective rated operating capacities of 1,400, 1,500, 1,750, 2,000 and 2,000 pounds. The brute among the group is the 248B, which has 76 net horsepower and the...

Astec underground.(Market Watch)
June 1, 2004... With the skid-steer style quick-attach capability of its loader arms, the "American Army Knife" uses numerous attachments to handle jobsite cleanup, stump removal, and transporting material. The backhoe attachment took the design of Case's D125...

Ditch witch.(Market Watch)
June 1, 2004... Model RT55, the most compact of the company's RT series, is designed to bridge the gap between mid-size and compact equipment. It features an integrated front cast weight that reduces counterweight requirements and offers backhoe, reel carrier,...

Case.(Market Watch)
June 1, 2004... The M Series 2 backhoe-loaders include the 580M, 580M Turbo, 580 Super M, 590 Super M, and 580 Super M+ models. They all feature new engines and a backhoe pilot-control option. Controls are infinitely variable in the fore/aft and lateral...

New Holland.(Market Watch)
June 1, 2004... Super Boom skid-steers offer two new options. With an optional hydraulic mount plate, operators can change attachments right from their seat. The Pick Up 'n Go universal attachment system allows hook up to more than 60 New Holland attachments...

Wirtgen.(Market Watch)
June 1, 2004... Designed for a range of applications, the W 50 and W 50 DC (Deep Cut) small milling machines feature Wirtgen's Flexible Cutter System, which allows interchanging drums of 300, 400 and 500 millimeters in width in less than 3 hours. The 80-hp,...

Bobcat.(Market Watch)
June 1, 2004... The redesigned V723 and V723FL VersaHandler models have wheel-bases 4 inches longer than the predecessor models, allowing an increase in rated capacity to 7,000 pounds. Each has a maximum height of 23 feet. The V723FL has frame-leveling...

Plan now for Conexpo-Con/Agg 2005, IFPE 2005.(Industry Events)
June 1, 2004... Even though Conexpo-Con/Agg 2005 is 9 months away, exhibit-space sales have surpassed 1.5 million net square feet, which includes more than 875 exhibitors. The show will be held March 15-19, 2005, at the Las Vegas Convention Center, Las...

Make teeth do the work.(Maintenance Tips)
June 1, 2004... Operating a loader bucket in a heel-down position increases wear on the bottom of the bucket and wears ground-engaging tools unevenly. It decreases penetration, actually trying to push the pile, and increases cycle times, fuel consumption, and...

Genesis offers excavator/attachment turnkey package.(Manufacturer News)
June 1, 2004... For customers who are looking for a pre-owned excavator-and-attachment combination, Genesis Equipment & Manufacturing will provide one. The company offers a service that basically does all the legwork to find a quality, used excavator complete...

Contractor tackles desert challenges.(Job Solutions)
June 1, 2004... For more headlines: ConstructionEquipment.com When planning for an $80-million-plus upscale residential development located at the base of a mountain, KE & G Development expected challenges. The company is handling all infrastructure...

Purge U-joint grease.(Maintenance Management)
June 1, 2004... Lack of lubrication is the first cause of early failure for universal joints, according to Thomas Koedam, with Dana Corp. He told a group gathered at the Technical Conference of the Association of Equipment Management Professionals (AEMP) they...

How to use ground-engaging tools without using them up: the right operating techniques can double the life of bucket teeth, moldboards, ripper tips and other wear parts. Here's how to do it right.(Maintenance)
June 1, 2004... Why worry about the life of your ground-engaging tools? The GETs themselves aren't terribly expensive. Replacement is simple, and can usually be performed during scheduled PM downtime. What's the big deal? The big deal is the hidden cost....

Win every time! The right combination to help you win in your business.
June 1, 2004... Choosing the right construction equipment for your operation shouldn't be a gamble. That's why Gehl stacks the deck in your favor with the most complete line of the finest quality compact construction equipment in the industry. Your...

The pros appraise: excavator design concepts; Local 150 operators give their opinions on Bobcat's conventional and zero-house-swing (ZHS) designs.(Hands-On Earthmoving)(Cover Story)
June 1, 2004... It's taken a while for the mini-excavator to catch on in North America. But today, these compact machines are working, unobtrusively, on small jobs and in small spaces just about everywhere. "Everywhere" now also includes the Apprenticeship and...

Kenworth: 'Super 18' comfortably keeps things legal; Is this truck in your future? It might be if your state legislators are talking about a Formula B law.(Hands-On Trucking)
June 1, 2004... Mention the federal bridge formula law and big, strong truckers cringe. The B Formula, as it's also known, was devised more than 50 years ago to limit gross weight not just by axle, but by numbers of axles (the more the better) and the...

Vertical-mast forklifts: work hard for the rough-terrain market; Telehandler competition has taken a big bite out of sales, but price and productivity advantages in some conditions can make lift trucks a better buy.(Buying File: Rough-Terrain Vertical-Mast Forklifts)
June 1, 2004... Rough-terrain, vertical-mast forklifts continue to pick and place a lot of construction materials on jobsites despite the meteoric rise of telehandlers. Conventional-style lift trucks lost market share to telehandlers when that challenger made...

Case: load control softens the ride.(Gallery: Rough-Terrain Vertical-Mast Forklifts)
June 1, 2004... Case's G Series forklifts have a load-control option, which the company credits with helping retain loads on rough terrain and reducing stress on the mast and rollers. For improved stability with heavy loads, the stance of the 588G is 8 inches...

Manitou North America: frame leveling stabilizes lifts.(Gallery: Rough-Terrain Vertical-Mast Forklifts)
June 1, 2004... Manitou redesigned the M Series to offer an array of choices that can customize a machine for individual applications. Users have the option of two- or four-wheel drive; torque converter or hydrostatic transmission; Perkins or Cat engines; and...

Noble: carriage- and mast-sideshift choices.(Gallery: Rough-Terrain Vertical-Mast Forklifts)
June 1, 2004... Two- and three-stage masts with dual cylinders, and dual chains eliminate center cylinder, hoses, and carriage side-chains. The RT Series comes with sideshift masts (nearly 4 inches to either side of center), and can be fit with sideshift...

Ingersoll-Rand: total traction control.(Gallery: Rough-Terrain Vertical-Mast Forklifts)
June 1, 2004... The RT-700H introduced the 80-hp Elite Series 4B3.9 Cummins diesel to Ingersoll-Rand's rough-terrain forklift line. The lever on the steering column gives the operator control of direction and the IR soft-shift transmission's three speed...

Sellick: auto-shift saves operator effort.(Gallery: Rough-Terrain Vertical-Mast Forklifts)
June 1, 2004... Sellick employs Perkins naturally aspirated diesels driving through ITL transmissions on its S and SG-R Series lift trucks. The new S Series can be equipped with powershift transmissions, whose electronic control modules and speed sensors...

Ausa: hydrostatic drive delivers smooth control.(Gallery: Rough-Terrain Vertical-Mast Forklifts)
June 1, 2004... The CH Series (six machines with capacities up to 6,500 pounds) is made up of compact, hydrostatically driven units with joystick control of all functions. Standard equipment on the CH320 includes a Lateral Chassis Leveler that allows the...

Taylor: heavy-lifting specialist.(Gallery: Rough-Terrain Vertical-Mast Forklifts)
June 1, 2004... The four Taylor Machine Works models are all powered by the Cummins QSB5.9-30 six-cylinder turbo diesel with a horsepower peak of 160. The heavy-lifting specialist's product range starts at higher weights than many manufacturers' largest models...

Load Lifter: new cab, mast and frame.(Gallery: Rough-Terrain Vertical-Mast Forklifts)
June 1, 2004... Load Lifter redesigned the 2200/2400 D Series forklifts with a new cab, mast and frame. Visibility, operator comfort, and on/off access have all been improved. A powershift transmission is available in the Laborer Series and the 4400 Series....

Kawasaki: more than a wheel loader.(Gallery: Rough-Terrain Vertical-Mast Forklifts)
June 1, 2004... Kawasaki's articulated, all-wheel-drive K-LIFT comes riding on 16-ply, 17.5 X 25 tires on all four wheels. Kawasaki offers Sellick's three-stage or two-stage masts and carriage widths of 84 or 72 inches with either an ITA Class IV Hook carriage...

Xtreme manufacturing: tightest two-wheel-drive turn radius.(Gallery: Rough-Terrain Vertical-Mast Forklifts)
June 1, 2004... The two-wheel-drive XT60B displays the smallest turning radius in the industry, at 111 inches. All of the Xtreme rough-terrain forklifts (manufactured by a subsidiary of Ahern Rentals) are two-wheel-drive machines. They feature 84-hp Perkins...

Liftking: turns tighter circles.(Gallery: Rough-Terrain Vertical-Mast Forklifts)
June 1, 2004... The M Series is the most recent addition to the Liftking rough-terrain forklift line, with a steering-axle redesign that offers greater turning angles and better maneuverability. Two-wheel-drive machines have a 65-degree steering angle with no...

Omega Lift: all-wheel steer delivers agile power.(Gallery: Rough-Terrain Vertical-Mast Forklifts)
June 1, 2004... The Omega Lift line includes four-wheel-drive models that are capable of four-wheel and crab steering. These machines also feature frame leveling to stabilize lifts from uneven surfaces. Perkins engines drive the whole line. Most models are...

Harlo: lots of diesel options.(Gallery: Rough-Terrain Vertical-Mast Forklifts)
June 1, 2004... The HP5000 comes with a choice of Deere or Cummins power, continuing Harlo's tradition of offering engine choices. The Cummins and Deere engines in the line are rated at 80 horsepower, and the Cat option in the HP6500 and HP8500 makes 86...

Power trac.(Compact Utility Loaders)
June 1, 2004... PT-2425 Bucketloader will lift 800 pounds 7 feet high. The backhoe attachment has a breakout force of 2,500 pounds, reach of 8 feet 4 inches, and digging depth of 6 feet. It's articulated with four-wheel steer. For information circle 153...

Vermeer.(Compact Utility Loaders)
June 1, 2004... The S600 ride-on unit can be mounted on rubber tires or rubber tracks over tires. Two engines are available: a 25-hp Kohler gas engine or 24.8-hp Kubota diesel. Attachments can be used with the universal attachment mounting plate, and hydraulic...

Finn.(Compact Utility Loaders)
June 1, 2004... Eagle compact loader features a parallel hydraulic system that provides full power simultaneously to all functions, allowing it to power the drive wheels and attachment at the same time. Its universal face plate fits any standard compact...

Toro.(Compact Utility Loaders)
June 1, 2004... The Dingo TX 413 loader has a 13-hp Honda gasoline engine. With an operating capacity of 420 pounds, the machine has a simple joystick to control the loader arm. Hydraulics are powered by a three-pump system, providing 7 gpm at 2,650 psi to...

Ditch witch.(Compact Utility Loaders)
June 1, 2004... Model SK500 is a 500-pound-operating-capacity machine and features a 24-hp air-cooled Honda engine. The walk-behind loader travels on rubber tracks powered by dual independent hydrostatic ground drives, providing a zero-degree turning radius....

Gehl.(Compact Utility Loaders)
June 1, 2004... Avantage AL20DX Series II loader has an SAE-rated operating load of 700 pounds and 20 inches of boom extension provided by a telescopic lift arm. It's powered by a 20-hp Kubota diesel engine. Other features include direct-drive hydraulic motors...

Bobcat.(Compact Utility Loaders)
June 1, 2004... MT52 mini track loader has a ride-on platform option that can be installed or removed within a couple of minutes. Direction and speed are controlled by one multi-function handle instead of two independent levers. The lift and tilt function are...

Thomas.(Compact Utility Loaders)
June 1, 2004... The redesigned ride-on 35DT features an enclosed drive system, large-volume fuel and hydraulic oil reservoirs, and larger operator compartment. It has 2,200 pounds of breakout force, lift capacity of 600 pounds, 11.5 gpm hydraulic output, and...

How to estimate market value: there are too many variables to create a simple formula, but this data-based method can help you estimate residual equipment values.(Equipment Executive)
June 1, 2004... Many equipment managers circumvent market value by being overly conservative and assuming a zero residual value in the owning-cost calculation. Yet a simple, efficient method of estimating residual values will produce rate calculations that are...

Gehl, Mustang machines grow even larger: Perkins Tier 2 engines power the largest skid-steer loaders on the market.(Earthmoving)
June 1, 2004... At the 2002 World of Concrete, Gehl introduced what was then the largest skid-steers on the market. Two years later, it retains that claim with two larger models marketed separately under the Gehl and Mustang nameplates. Both machines are...

Topcon's "Millimeter GPS" employs new laser technology: this new positioning system, says Topcon, has the potential to make vertical measurements far more accurately than standard GPS systems.(Earthmoving)
June 1, 2004... Topcon has just announced its newest and most advanced system, Millimeter GPS. According to the company, "this revolutionary new technology will provide a significant enhancement in the vertical-measuring precision of RTK (real-time kinematic)...

Bobcat.(Market Watch Lite)
June 1, 2004... Bobcat's first 4X4 utility vehicle, the 2200, is equipped with automatic locking differentials that engage immediately when a wheel loses traction. There's a choice of Honda gas or Kubota liquid-cooled diesel engines. With its aluminum chassis...

Atlas Copco.(Market Watch Lite)
June 1, 2004... A complete line of 15 hydraulic breakers spans impact classes from 200 to 15,000 foot-pounds. The units are separated into three categories: the light Penta Breaker (PB), Medium Breaker (MB), and Heavy Breaker (HB) Series. On all models,...

Iveco motors.(Market Watch Lite)
June 1, 2004... The company's NEF Series 3-, 4- and 6-cylinder diesel engines allow access to every part of the engine to reduce maintenance time. Noise level is below 91 dB(A). The company says it offers custom configurations to match any power need. ...

Honda power equipment.(Market Watch Lite)
June 1, 2004... Available in 3,800-, 5,000-, and 6,500-watt sizes, EB/EM Series generators are powered by the company's GX engines. The units have a 6.6-gallon fuel tank, redesigned outlet panel with easy service access, fuel gauge, and reinforced standing...

Wacker.(Market Watch Lite)
June 1, 2004... The company's line of wet screeds now provides blade widths from 4 to 16 feet and blade heights of 6.5 or 4.8 inches. The exciter weights on the new screeds are new adjustable, which provides a selection of seven amplitudes to match the...

Topcon.(Market Watch Lite)
June 1, 2004... HiPer(r) Pro incorporates a UHF radio into the base unit that provides RTK operation up to 4 miles away. The integrated radio also employs Free Channel Scanning technology, allowing it to automatically switch to interference-free channels on...

MBW.(Market Watch Lite)
June 1, 2004... To reduce maintenance demands of a flex-cable and rigid shafting, the ScreeDemon wet screed features a low-cost, durable flex coupler to link between the engine and eccentric. The screed couples to its screed bar via a compression lock and has...

Hammerhead.(Market Watch Lite)
June 1, 2004... The company calls its HB-550 Hammerhead II an "impacting device." At a speed of 22 feet per second, the unit fires its 385-pound impact rod every 1.5 seconds. It mounts to skid-steers and to the front of large wheel loaders. The unit fires...

Wacker.(Market Watch Lite)
June 1, 2004... BS 50-4 and BS 60-4 rammers feature a 4-stroke cycle engine--the WM 90, which is designed specifically for Wacker rammers. The 4-cycle rammer engine features a new air-filtration system, along with speed-stabilizing throttle linkage, 3-piece...

Terex.(Market Watch Lite)
June 1, 2004... The TS100 power trowel features twin joystick controls with a hydraulically assisted steering system. It uses 10X18-inch float blades, 8X18-inch finish or combination blades, or 48-inchdiameter disc-float pans. It delivers blade speeds up to...

Robin America.(Market Watch Lite)
June 1, 2004... Power Series portable generators generate maximum outputs from 1,100 to 4,300 watts. With large diameter alternators, the generators provide high surge capacity when powering machinery such as air compressors, and they maintain a smooth, stable...

Lincoln Electric.(Market Watch Lite)
June 1, 2004... The Air Vantage 500 provides a welder, generator and air compressor in a single unit. The gear-driven air compressor delivers 60 cfm at 100 psi at a 100-percent duty cycle. It also produces 20,000 watts of 3-phase auxiliary power and 12,000...

Multiquip.(Market Watch Lite)
June 1, 2004... Replacing the MVH-304 Series, the Mikasa MVH-306 Series reversible plate compactor generates 10, 125 pounds of compaction force. The unit's new plate design, 18X34 inches in size, features wider-diameter steel piping on the engine protection...

Leica Geosystems.(Market Watch Lite)
June 1, 2004... Disto Plus features Bluetooth wireless technology, which allows users to send measurements to a Bluetooth enabled Pocket PC or laptop. The unit can add, subtract and multiply measurements and take 10,000 measurements on two AA batteries. ...

Briggs & Stratton.(Market Watch Lite)
June 1, 2004... The company's Commercial Power group recently introduced a range of Vanguard V-Twin Big Block air- and liquid-cooled engines with horsepower ratings from 25 to 35. Innovations include an advanced debris-management system for air-cooled versions...

How to use your Buyer's Guide.(2005 Buyer's Guide)
June 1, 2004... In print or online, Construction Equipment's 2005 Buyer's Guide gives you an accurate collection of nearly 2,500 manufacturers, the products they make, and more than 3,000 distributors. Here's how best to use the information to efficiently find...

Management services.
June 1, 2004... The following pages contain information to enhance your management efforts with access to consultants, appraisal services, insurance brokers, financial institutions, crane-certification firms, online business services and industry publications...

Industry associations.(Association Listings)
June 1, 2004... Looking for information on a specific aspect of construction? Listed here are many construction-related associations, along with contact information including websites that you can check for the association's focus, services and membership...

Equipment-rental chains.(Rental Chains)
June 1, 2004... Looking for a rental giant's local branch? Find them at the websites or phone numbers listed here. Looking for a more thorough list of rental outlets in an area? Check the rental locator at ConstructionEquipment.com Ahern Rentals Las...

Product locator.
June 1, 2004... The following pages contain an alphabetical index along with corresponding page numbers for all product categories included in this Buyer's Guide A Abrasive Blasting Equipment 36 Accumulators,...

Products.
June 1, 2004... Abrasive Blasting Equipment A-Bec Industries Aqua Blast Corp. Baumac International Blastrac Boride Products Clemco Industries Corp. Empire Abrasive Equipment Co. Geo. Olcott Co., Inc. Hydroblaster, Inc....

A unique plan to put best face forward.(Volvo)
June 1, 2004... Illinois contractor brings in fleet of all new Volvo units as part of replacement program. [ILLUSTRATION OMITTED] WHEATON, IL -- In astrological circles, the term "trine" refers to a time in which celestial objects are in a specific...

Manufacturers.
June 1, 2004... A & D Weighing, 1555 McCandless Dr., Milpitas, CA 95035 (408) 263-5333; Toll Free: (800) 726-3364; Fax: (408) 263-0119 E-mail: scales@andweighing.com www.andweighing.com A-Bec Industries, 1 Bay Plaza, Ste. 450, 1350 Bayshore Hwy.,...

Distributors.
June 1, 2004... ALABAMA (AL) 6323 AK EQUIPMENT RENTAL & SALES, INC., 1720 2nd Ave. N.W., Cullman, AL 35055 (256) 734-0038; Fax: (256) 734-0427 SALES & SERVICES: Mustang Manufacturing Co., Inc. 1011 ADVANCED FLUID POWER, 5780 1-10 Indl. Pkwy., P.O....

©2009 Gale, a part of Cengage Learning. All rights reserved.
About us | FAQs | Contact us | Privacy policy | Terms and conditions
Other Gale sites: Encyclopedia.com | HighBeam Research | Acquire Content | Books & Authors | Goliath | MovieRetriever | Smart QandA