AccessMyLibrary provides FREE access to over 30 million articles from top publications available through your library.
Trade periodical covering the construction and building materials industry.
Set up an RSS feed
Create a link to this page
Copy and paste this link tag into your Web page or blog:
Cold in-place recycling pavement rutting prediction model using grey modeling method.
May 1, 2007
Pavement design with central plant hot-mix recycled asphalt mixes.
May 1, 2007
Cyclic response of concrete members with bond-damaged zones repaired using concrete confinement.
May 1, 2007
Characterization of concrete blocks containing petroleum-contaminated soils.
May 1, 2007
Effects of rejuvenator on performance-based properties of rejuvenated asphalt binder and mixtures.
May 1, 2007
Effect of W/C ratio on covering depth of fly ash concrete in marine environment.(water/cement ratio)
May 1, 2007
Improving the abrasion resistance of hydraulic-concrete containing surface crack by adding silica fume.
May 1, 2007
Evaluation of image analysis techniques for quantifying aggregate shape characteristics.
May 1, 2007
Feasibility investigation of the shear repair of timber stringers with horizontal splits.
May 1, 2007
Proposed design guidelines for strengthening of steel bridges with FRP materials.(fiber reinforced polymer)
May 1, 2007
Study on properties of recycled tire rubber modified asphalt mixtures using dry process.
May 1, 2007
The use of recycled tire chips to minimize dynamic earth pressure during compaction of backfill.
May 1, 2007
A laboratory study on stone matrix asphalt using ground tire rubber.
May 1, 2007
The effects of air entrainment and pozzolans on frost resistance of 50-60 MPa grade concrete.
May 1, 2007
The influence of compaction pores on sorptivity and carbonation of concrete.
May 1, 2007
Feasibility study on soil improvement using electrochemical technique.
May 1, 2007
Performance evaluation of high modulus asphalt mixtures for long life asphalt pavements.
May 1, 2007
Characterization and reactivity of silicatic consolidants.
May 1, 2007
Design-oriented stress--strain model for concrete prisms confined with FRP composites.(Report)
May 1, 2007
General analysis and application to redundant arches under static loading.(Report)
May 1, 2007
Calendar.
May 1, 2007