Industrial Paint & Powder articles from September 2000

Industrial Paint & Powder archives from September 2000

Support the Industry: Join an Association.(Brief Article)
September 1, 2000... As an adult, I haven't been much of a joiner. Except for my church, I have stayed clear of many other organizations, clubs or activities that might take up too much of my time and money. But lately I've been rethinking the idea of joining...

Valspar and Lilly Industries Agree to Merger.(Valspar Corp.; Lilly Industries Inc.)(Brief Article)
September 1, 2000... The boards of directors of Valspar Corp. (Minneapolis) and Lilly Industries Inc. (Indianapolis) have approved an agreement under which Valspar will acquire all outstanding shares of Lilly common stock for $31.75 per share. The total value of...

House Votes to Quash Ergonomics Spending.(United States. Occupational Safety and Health Administration)(Brief Article)
September 1, 2000... The U.S. House of Representatives voted 217-214 to approve an appropriations bill that cuts more than $1.7 billion from President Bill Clinton's initial budget request for Labor, Health and Human Services, including funding for OSHA. An...

New Pigment Plant Caps Ciba's Delaware Expansion.(Ciba Specialty Chemicals)(Brief Article)
September 1, 2000... The opening of a new, state-of-the-art quinacridone pigments plant completes Ciba Specialty Chemicals' (Tarrytown, NY) expansion and modernization of its Newport, DE, site. Over the past eight years, the company has invested $180 million at the...

Wagner Moves to New State-of-the-Art Facility.(Wagner Systems Inc.)(Brief Article)
September 1, 2000... Wagner Systems, a leading manufacturer of finishing equipment, has relocated from its 43,000-square-foot Glendale Heights, IL, location to a new, state-of-the-art facility in Carol Stream, IL. Wagner President and COO Glen Kucera cited Wagner's...

Ciba Spinoff Emerges as Vantico.(created from Performance Polymers Div. of Ciba Specialty Chemicals; Morgan Grenfell Private Equity)(Brief Article)
September 1, 2000... Vantico (Basel, Switzerland), a new, independent chemical company, has been created through a spin-off and management buy-in/buy-out of the Performance Polymers Div. of Ciba Specialty Chemicals, backed by Morgan Grenfell Private Equity. Vantico...

Avecia Launches New NeoResins Logo.(Brief Article)(Product Announcement)
September 1, 2000... The NeoResins arm of Avecia Inc. (Wilmington, DE), formerly Zeneca Resins, has launched a new company logo to serve as a strong identifier for it and the products it produces. The company manufactures effect polymers, primarily waterborne...

New Paint Shop Included in DaimlerChrysler Plant Expansion.(Pillette Assembly Plant)(Brief Article)
September 1, 2000... DaimlerChrysler announced that it will invest $1.5 billion in the modernization and expansion of its Pillette Assembly Plant in Windsor, Ontario, Canada. A 2-million-square-foot addition will more than triple the size of the present facility...

Akzo Nobel Plans Coatings Plants in China.(Brief Article)
September 1, 2000... Chemical manufacturer Akzo Nobel (Amhem, the Netherlands) is spending approximately $27.4 million to build two new coatings plants in China. The site in Suzhou, near Shanghai, will focus on car refinishes, powder coatings and transportation...

Grace Acquires DuPont's Colloidal Silicas Business.(W.R. Grace and Co. acquires E.I. du Pont de Nemours and Co.'s Ludox business)(Brief Article)
September 1, 2000... W.R. Grace & Co. (Columbia, MD) has acquired the Ludox colloidal silicas business of the DuPont Company and will integrate it into its Davison Silica Products business. Typical end uses for colloidal silicas include coatings, ink-receptive...

Solutia Opens Powder Resins Plant in Brazil.(Brief Article)
September 1, 2000... Solutia Inc. (St. Louis) has extended its capacity to supply performance ingredients for the powder coatings industry with the opening of its new powder resins production unit in Suzano, Brazil. The polyester powder resins produced at the new...

Mergers and Acquisitions.(Dominion Colour Corp.; Compania Venezolana De Pigmentos)(Brief Article)
September 1, 2000... International pigment supplier Dominion Colour Corp,. (Toronto) has acquired Compania Venezolana De Pigmentos (Valencia, Venezuela), a South American manufacturer of azo organic pigments and lead chromates. Dominion expects to increase...

New Facilities & Expansions.(Brief Article)
September 1, 2000... Netzsch Inc. (Exton, PA) has broken ground on a $2 million state-of-the-art grinding laboratory. The two-story laboratory will be equipped with high-speed dispersion and mixing equipment, analytical equipment, media mills, granulating and...

Association News.(Brief Article)
September 1, 2000... The prospect of a merger of NACE International and The Society for Protective Coatings grew remote after the NACE International board of directors voted to reject the NACE/SSPC Merger Task Group Proposal and to suspend further negotiations. The...

BASF Corp.(Brief Article)
September 1, 2000... Specialty chemical manufacturer BASF Corp. has been commended for safety and health excellence at its Appleton, WI, plant by the Wisconsin Council of Safety and the state Department of Workforce Development. Winners in 16 categories were...

ISO/QS Certification.(Brief Article)
September 1, 2000... Arvin Inc.'s (Columbus, IN) Roll Coater division, ISO 14001, for its metal coil coating operation in Weirton, WV.

Penalty Reductions and Self Audits Part of Enforcement Deal.(Brief Article)
September 1, 2000... A group of about 600 companies will perform audits of their reporting procedures under the Toxics Release Inventory (TRI) and immediately report the findings to EPA as part of a new deal between the agency and industry. In exchange, businesses...

Spray Gun Earns ETV Verification.(Brief Article)
September 1, 2000... The Laser Touch model LT-B512 from Laser Touch and Technologies (Waterloo,2 IA) has been tested and verified by EPA's Environmental Technology Verification (ETV) program. The testing, performed at the Iowa Waste Reduction Center's Painting and...

Emissions Data From Seven Major Industrial Sectors to Be Released.(Brief Article)
September 1, 2000... In a major expansion of the Clinton administration's efforts to inform the public about toxic pollution released into local communities, EPA is making public for the first time toxic emissions figures for seven major industrial sectors. ...

Environmental Regulations to Contain New Cost-Benefit Summaries.(White House Office of Management & Budget requires)(government regulations to appear in the Federal Register)(Government Activity)(Brief Article)
September 1, 2000... All government regulations, including environmental regulations, will soon appear in the Federal Register along with a new, standardized appraisal of their relative economic costs and benefits. Congressional observers hope new cost-benefit data...

Coating Process Paints Picture of Infinite Possibilities.
September 1, 2000... * No paint, no powder, yet a finished surface that can assume the appearance of wood, marble, stone, camouflage or just about anything. Final Finish, a new finishing process from Immersion Graphics (Columbus, GA), adheres to steel, aluminum,...

Smarter Controls & Robots Leading Automation Trend.(powder coating equipment)(Statistical Data Included)
September 1, 2000... Automation is allowing operators to do more. Monitoring the system is becoming a superficial part of their jobs. Faster, cheaper, smarter. This may sound like the motto NASA has adopted for its space programs in recent years, but it's also...

Control Systems, Collaboration Keys to Optimizing Automation.
September 1, 2000... In the real world, configuring components for maximum efficiency can be difficult. Suppliers can help. Smarter control systems devised in recent years have increased throughput and dramatically reduced the manpower shops require....

Solvents--What Lies Ahead?(solvent use in view of environmental regulations)(Industry Overview)
September 1, 2000... Old ways of looking at VOC and HAP solvents are changing. coatings manufacturers are finding replacement solvents. Organic solvents have always played a vital role in coatings. However, since the advent of Rule 66 and the Clean Air Act of...

New Pretreatment System Helps Manufacturer Grow.(Dauenhauer Manufacturing)(Brief Article)(Company Profile)
September 1, 2000... Until late last year, Dauenhauer Manufacturing (Santa Rosa, CA) used old-fashioned elbow grease to clean farm equipment before painting it. Then, out of necessity, the company upgraded its pretreatment system to one that has cut costs and labor...

ROOBOL ON PAINTING.(letters to the editor)(Brief Article)(Letter to the Editor)
September 1, 2000... High TDS Hinders Adhesion It appears that a seasonal occurrence of high total dissolved solids (around 1,000 ppm) is affecting our paint adhesion. We have to haul water from another source for our rinsing. We are looking for a solution...

POWDER COATING WITH COLLINS.(letters to the editor)(Brief Article)(Letter to the Editor)
September 1, 2000... Cleaning the Oven We use powder that contains e-caprolactam. What is the best way to clean a powder cure oven that has fouled? I follow the old school of liquid painting when it comes to defouling cure ovens. Here is my recommendation:...

COATINGS R&D NOTEBOOK.(Brief Article)
September 1, 2000... Pigments for Color Matching We want to establish a database for color matching. What are the major factors to consider when selecting pigments? Pigment databases depend on the targeted colors. The following are some general...

Powder Coating 2000[TM].(Brief Article)
September 1, 2000... Indiana Convention Center, Indianapolis, Sept. 26-28, 2000 Powder Coating 2000 marks the 10th conference and exhibition sponsored by the Powder Coating Institute exclusively for the powder coating industry. Attendees will see the latest...

Eductors Improve Liquid Circulation.(Brief Article)
September 1, 2000... Model 46550 tank-mixing eductors have large flow openings and flow-through chambers that minimize clogging and maximize liquid circulation in process tanks without the use of air agitation. The 4:1 circulation ratio offers more circulation of...

One-Step Cleaner for Large Parts.(CrysCoat 600 NR liquid detergent iron phosphate metal cleaner)(Brief Article)
September 1, 2000... CrysCoat 600 NR liquid detergent iron phosphate offers metal finishers a one-step manual method for cleaning and pretreating large parts. It requires no rinsing, counteracts the effects of hard water, reduces streaky coatings and increases...

Vacuum Is Near Maintenance-Free.(industrial vacuum)(Brief Article)
September 1, 2000... This industrial vacuuming system is suitable for light applications as well as the high-volume and high-tonnage requirements of the powder and paint coating industry. The MAXcartridge filters incorporated into the vacuum's powerhead design have...

Thickness Gauge Has Specialty Probes.(PosiTector 6000 Series coating thickness gauge)(Brief Article)
September 1, 2000... The PosiTector 6000 Series coating thickness gauge is available with interchangeable probes for measuring specific applications. Probes for measuring coatings to 250 mils and right-angle probes for measuring inside diameters and other...

Powder Coatings for Low Cure.(Powdura Spice Effects)(Brief Article)
September 1, 2000... The Powdura line of low-cure epoxy, polyurethane and TGIC polyester powder coatings is suitable for pre-assembled, heat-sensitive parts; large, heavy parts; and parts that require advanced cure processing. The low-cure technologies use less...

Hook Rotates 360 Degrees.(hoisting machinery)(Brief Article)
September 1, 2000... The Ultrabake spin hook's double ball-bearing construction allows it to hold loads to 200 pounds. The hook comes in either a C or V configuration and can rotate 360 degrees. It can be used to spin either the part or the rack.

Stripping Furnace Monitors Temperature.(Advanced Controlled Pyrolysis)(Brief Article)
September 1, 2000... The Advanced Controlled Pyrolysis furnace uses a rate-control system to monitor temperature increases during stripping of paint and powder coatings. If temperature increases in either the furnace or afterburner compartment exceed the...

Conveyor's Enclosed Track Prevents Contamination.(Brief Article)
September 1, 2000... This conveyor has a tubular, enclosed-track design that minimizes paint contamination. A 9-inch-radius horizontal track curve reduces oven size requirements. The track and chain act as a conductor, improving adherence of both powder and liquid...

Mixer System Is Compact.(Model FCCM)(Brief Article)
September 1, 2000... Model FCCM mixer combines powder coating and other batch processing applications into one compact system, reducing plant floor space requirements. It requires minimal cleaning and maintenance between batches or product changes. The mixer offers...

Custom Coater Handles Product Variety.(Brief Article)
September 1, 2000... Custom coating application services are available, including powder, E-coat and blank-line coating. The company coats parts, components and finished products for the automotive, appliance and general metals industries.

Lubrication System Extends Conveyor Life.(Brief Article)
September 1, 2000... This lubrication equipment is suitable for use on conveyors and other moving point applications. Modular construction eases installation and service. A complete line of lubrication products provides the preventive and predictive maintenance...

Pretreatment System Washes Oversized Parts.(Brief Article)
September 1, 2000... The Cyclonator closed-loop washing system is made of individual 6- by 6-foot racks that can be bolted together to make 18- by 42-foot pads, making it suitable for washing oversized parts. Galvanized, epoxy, plastic and stainless-steel racks are...

Batch Burn-Off Ovens Are Pollution-Free.(Brief Article)
September 1, 2000... Batch burn-off ovens remove paint, powder coatings, epoxies, lacquers, urethanes and other organic or inorganic compounds from a variety of parts. The ovens reduce labor costs and minimize environmental impact.

Sifter Is Easy to Clean.(Brief Article)
September 1, 2000... Kek centrifugal sifter has a cantilever design that makes cleaning easy. The shaft and paddle assembly is supported from the drive end by a rigid bearing assembly, eliminating the need for shaft support from oversized end bearings or seals. The...

Bonded Powders Deliver Uniform Finish.(Brief Article)
September 1, 2000... The even distribution of pigments in this line of bonded metallic powder coatings yields a more uniform finish. The powder coatings are available in custom and specialty finishes and a variety of chemistries. The coatings are reclaimable.

Pretreatment Chemicals Improve Paint Adhesion.(Brief Article)
September 1, 2000... Guardian pretreatment cleaners, iron phosphates, zinc phosphates, chrome and nonchrome conversion coatings, no-rinse pretreatments, rinse aids and nonchrome sealers improve paint adhesion on metals and plastics. The line includes Permatreat...

Filter Cartridges Are Reusable.(Brief Article)
September 1, 2000... Pulsator spun-bond polyester filter cartridges for powder spray booths are both efficient and reusable. The cartridges' nonlinting quality reduces rejects and rework. The cartridges use a low pulse pressure, which results in compressed-air...

Table-Top Extruder.(Brief Article)
September 1, 2000... Model TSK-TT2O twin-screw powder coating extruder is a table-top model with 20.6-mm diameter co-rotating intermeshing twin screws. The unit features a horizontally split and hinged barrel design for easy access to processing sections. Compact...

Touch-Up Paint Repairs Blemishes.(Brief Article)
September 1, 2000... Precision Color touch-up paint helps repair blemishes by matching the color and gloss of original powder finishes. It is available in aerosol cans, brush-in-cap bottles, paint pens and traditional-style paint cans.

Vacuum Has High-Capacity Drum.(Model 1040 vacuum system)(Brief Article)(Product Announcement)
September 1, 2000... Model 1040 continuous-duty, 8.5-hp vaccuum system is designed for as many as three users. It can be used for cleaning out cartridges within a powder coating booth. Operators vacuum directly into a 55-gallon drum for extended vacuuming time. The...

Silicas Control Static Charge.(Brief Article)
September 1, 2000... Aerosil 200 and Aerosil R972 fumed silicas control the static charge and improve the flow, rheology and process capability of powder coatings. The negatively charged hydrophilic Aerosil 200 improves powder blending, providing a more homogenous...

Coating System Has Space-Saving Design.(Brief Article)
September 1, 2000... This coating system features a SlideRail Square Transfer design that maximizes the throughput for powder and liquid coating applications while reducing the floor space required. The system includes counterflow spray/immersion wash and rinse...

Software Tracks Jobs From Start to Finish.(Brief Article)
September 1, 2000... This computer software tracks powder coating jobs from quoting and costing through production and into accounting. It features a quote control program with goal billing and surface-area calculations, a complete paint and powder inventory, time...

Finishing Systems Apply Powder to MDF.(Brief Article)
September 1, 2000... Powder coating systems that apply powder to medium-density fiberboard are available. Possible MDF applications include kitchen cabinets, audio speaker cabinets, ready-to-assemble furniture, entertainment centers and office workstations. These...

Sieve Allows Quick Color Changes.(Brief Article)
September 1, 2000... The RVM-22E center discharge reclamation sieve has a 22-inch screen diameter and the capacity to hold a 50-pound box of powder coating. This portable unit uses only three product contact parts, allowing easy color changeover and quick coating...

I-Beam Cleaners Reduce Contamination.(Brief Article)
September 1, 2000... Model 300-I and 400-I conveyor cleaners clean chain links and bearing brackets on I-beam conveyors. The spring-loaded cleaners automatically move away from the beam if a part or trolley passes through the brushes at an odd angle and return to a...

Cross-linkers for Weather-Resistant Powder Coatings.(Brief Article)
September 1, 2000... This line of cross-linkers for exterior-durable powder coatings offers an alternative to polyurethane and polyester/TGIC powder coatings in industrial. automotive and lawn and garden applications. Powder coatings formulated with these...

Pretreatment System Cleans, Phosphates, Rinses.(Brief Article)
September 1, 2000... A closed-loop pretreatment system for powder and surface coating cleans substrates, applies phosphate and rinses. The two-stage system uses water heated to 160[degrees]F, pressurized to 1,000 psi. Fluids are cleaned and recycled in this...

Tribo Gun Coats Tight Areas.(Airstatic tribo powder coating system)(Brief Article)
September 1, 2000... The Airstatic tribo powder coating system is suitable for both large and small powder coating applications. The gun's electrostatic charge eliminates the need for a high voltage charging system. Benefits include improved deposition in tight...

Charging System Controls Current and Voltage.(300-Series powder guns)(Brief Article)
September 1, 2000... The 300-Series powder guns feature the Total Energy Control charging system that automatically controls current and voltage discharge. The system provides smooth powder application at high film builds, eliminates Faraday-cage effect, and offers...

IR Cure Ovens Are Custom-Designed.(Brief Article)
September 1, 2000... This line of JR ovens is suitable for curing powder coatings on many products, including automobile components such as aluminum wheels, struts and shocks, brake pads, engine blocks, oil filters, valve covers and car frames. Other heat and...

Unit Detects Coating Layers.(Brief Article)
September 1, 2000... Spray-i uses an optical sensor to detect the difference between a wide range of coated and uncoated parts. Applications include detecting basecoats, adhesion promoters and other coatings that may not be visible on the final product. The...

Test Chambers Measure Lightfastness.(Q-Sun/1000)(Brief Article)
September 1, 2000... Q-Sun xenon test chambers accurately simulate how materials fare when exposed to indoor and outdoor light. They test for fading, gloss loss and color change in products. The Q-Sun/1000 is a table-top tester, and the Q-Sun/3000 is a...

Rack System Offers Hook Options.(Z-Bar racking system)(Brief Article)
September 1, 2000... The Z-Bar racking system combines the flexibility of removable hooks with the strength of a welded system. The hooks can be removed without stripping the bar, for continuous grounding. The bars are available in either 18 or 15 gauge and can be...

IR Ovens Improve Operating Efficiency.(Brief Article)
September 1, 2000... Cata-Dyne catalytic gas infrared ovens provide an efficient solution to a wide range of finishing and process heating applications. Each system is configured to user specifications and tested for optimum performance. The ovens decrease...

UV Systems Maximize Cure at Low Temperatures.(Brief Article)
September 1, 2000... These UV-curing systems use Cold Mirrors and IR-cut filters to reduce heat by as much as 60%. Lamphouses are available from 200 to 800 watts per inch and in are lengths from 2 to 100 inches, eliminating the need for multiple lamp systems. They...

Cord Masks Odd-Shaped Holes.(Brief Article)
September 1, 2000... This silicone cord is made of a sponge-like material that conforms easily to irregularly shaped cavities. Its pliability makes it suitable for masking square holes, grooves and slots. This masking cord withstands temperatures to 500[degrees]F...

Turnkey Systems Meet Finishers' Needs.(Brief Article)
September 1, 2000... Individual equipment components to fully integrated finishing systems are available for industrial finishers. Applications include hardware, electronics, automotive, furniture and aerospace industries. Design, fabrication, installation and...

Coating System Is Flexible.(Brief Article)
September 1, 2000... The Flex-Line coating system works with both powder and liquid applications. It can accommodate large parts to 25-feet long, 7-feet tall and 9-feet wide, or it can coat 630 square feet of smaller parts per hour. The system can meet the demand...

Powder Coatings Come in Range of Formulations.(Brief Article)
September 1, 2000... Envirocron powder coatings are available in a wide range of colors and chemistries. Users can choose acrylics, epoxies, polyesters, hybrids or polyurethanes to meet specific application needs. Functional powders are also available.

IR Ovens Shorten Cure Times.
September 1, 2000... Contraflow and Sprint IR ovens are available with electric or gas catalytic emitters to meet the user's needs. The ovens offer zone temperature capabilities and specific part curing profiles. Reverse convection airflow allows even heat...

Temperature Profiler Made for Powder Coating.(EasyTrack profiling system)(Brief Article)
September 1, 2000... The EasyTrack profiling system is designed for the powder coating and finishing industry. Its data logger records 25,000 readings over five channels, offers accuracy to [+ or -]1[degrees]C and provides programmable readings from one second to...

Finishing Software Eliminates Guesswork.(PowderTrak hardware/software package)(Brief Article)
September 1, 2000... The PowderTrak hardware/software package gives the user control over the finishing process. It manages powder use, pretreatment, conveyors, dry-off, powder application and cure. It monitors run-time, uptime and downtime and pinpoints potential...

Finishing Racks Are Adjustable.(Brief Article)
September 1, 2000... This line of racks and hooks can be adjusted for a variety of coating applications. Modular racks, available at any height and length, are slotted so the distance between hooks can be varied according to part size. Double v hooks, vc hooks,...

Classifier Maximizes Yield.(TSP classifier)(Brief Article)
September 1, 2000... The TSP classifier is designed for ultrafine powder classification in the 1.5- to 30-micron size range. It features a targeted material flow, which produces clean coarse product without undesirable ultrafine portion, maximizing yield. The...

Job-Shop Software.
September 1, 2000... Visual Shop software was developed specifically for the coatings and finishing industry. This job shop program includes quotations, order entry, processes, inventory, certifications, shipping, tracking, scheduling, invoicing, sales reports,...

Consulting Services for Powder Industry.
September 1, 2000... This company offers consulting services to clients in the powder coating industry. It specializes in powder system design and specification; chemical and material specification, selection and testing; quality improvements; process control; cost...

Finishing Systems Fit Individual Needs.(Brief Article)
September 1, 2000... Complete coating lines for the finishing industry are available, including powder systems for metal, wood and plastic applications. Services include concept development, design, engineering and control technology. Material flow automation and...

Stripping Machine Has Dual Functions.(Brief Article)(Product Announcement)
September 1, 2000... Batch + Kontinuous salt bath stripping machine removes organic coatings, paint or powder. The dual-function machine strips part carriers at normal line speeds. Using the same bath, it also strips small loads of reject parts without interfering...

Environmental Rooms Offer Modular Flexibility.(Brief Article)
September 1, 2000... These cleanrooms for paint and powder finishing systems are insulated and use steel-faced wall panels. The smooth steel skin allows for easy clean-up and is finished with an acrylic baked enamel. The roof can be designed to support an HVAC...

Blast System Uses Plastic Media.(Pressure Dry Hone system )(Brief Article)
September 1, 2000... The cabinet-style Pressure Dry Hone system uses plastic blast media to strip paint and powder coatings from parts. A high-velocity stream of plastic media removes the coatings without damaging the substrate. The nontoxic media are then...

Grinding System for Small Batches.(powder coatings)(Brief Article)
September 1, 2000... The #3PCG grinding system is specifically designed for small-batch production of powder coatings. The grinding system incorporates the grinder, feed auger, air silencers, control panel and air cooling coil, but is easy to disassemble for...

Gauge Tests Thickness Two Ways.(Dualscope MP20)(Brief Article)
September 1, 2000... The Dualscope MP20 coating thickness gauge measures on ferrous and nonferrous substrates using both the magnetic-induction and the eddy-current test methods. The hand-held unit is compatible with a wide variety of interchangeable probes. It...

Powder Coating Resists Corrosion.(Brief Article)
September 1, 2000... Epflor is a blend of thermosetting powder coating and PTFE that decreases the coefficient of friction by 36.4%. It has good corrosion and wear resistance and is available in standard and custom colors. This complete line of thermoplastic powder...

Thickness Probes Reduce Rejects.(powder probes)(Brief Article)
September 1, 2000... The FN1.6 and F1.6 powder probes measure the thickness of powder before baking. Benefits include fewer rejects because of insufficient or excess powder, reduced powder costs and quicker setups. The probes are compatible with the MiniTest Series...