Material Handling Product News articles from December 2006

Material Handling Product News archives from December 2006

Lift trucks reduce emissions.(EDITOR'S CHOICE)
December 1, 2006... The 8-Series of internal combustion engine lift trucks produces 70% less smog-forming emissions than allowed by the 2007 EPA emissions standards. In addition, all gasoline, LPG and CNG models also meet California's 2010 emissions standard for...

RFID military compliance solution.(EDITOR'S CHOICE)
December 1, 2006... The RFID military compliance solution offers a quick and cost efficient way to meet Department of Defense mandates by using a supplemental RFID label that is encoded with a unique identification code. The code is printed as a bar code and in...

Compact, reusable RFID tag for harsh applications.(EDITOR'S CHOICE)
December 1, 2006... Built for harsh industrial applications, a compact, reusable RFID tag is rugged, resists chemicals and survives extreme temperatures. It is available in both EPCglobal Gen 2 and ISO 18000-6B protocols for worldwide use. Measuring 1.22 x 3.11...

Small footprint printer.(EDITOR'S CHOICE)
December 1, 2006... The SLP 440 label printer combines a small footprint with 300 dpi thermal printing, 2D bar coding and enhanced networking and graphics. With an extensive label size range up to 2 1/8 inch wide, the printer makes labels for various containers,...

RFID reader works around the world.(EDITOR'S CHOICE)
December 1, 2006... The V750 RFID reader platform supports global frequency bands in North America, Europe and Asia. It enables high-performance electronic product code (EPC) reading and writing that expands RFID applications while lowering installation and...

Powered convertible hand truck.(Ergonomic-Related Products)
December 1, 2006... The Powered Gemini powered convertible hand truck reduces stress on users while increasing safety. It nearly eliminates pushing and pulling loads. It has four nitrogen-inflated pneumatic tires, a direct drive motor, and a capacity of 1,000...

Ergonomic mast lift holds up to 5,000 pounds.(Ergonomic-Related Products)
December 1, 2006... With a 5,000-pound capacity, an ergonomic mast lift raises loads to a maximum height of 63 inches at a rate of 30 inches per minute. The mechanically actuated lift can be stopped at multiple heights with positive locking, allowing operators to...

Compact, battery-powered lift cart.(Ergonomic-Related Products)
December 1, 2006... A compact, battery-powered lift cart works to eliminate potential body strain caused by manual transporting and lifting in manufacturing plants and warehouses. Designed to be light-weight and maneuverable, the ErgoCart is easy to push and steer...

Handle molds, dies more ergonomically.(Ergonomic-Related Products)
December 1, 2006... The MDC-2500-PW-PT single-deck cart moves tooling for stamping and molding machines. A 24-volt DC battery powers the cart, which features powered push/pull capability. Rollers are integrated into the 29-inch x 36-inch deck for easy transfer of...

Low profile, air-operated table lifts, rotates.(Ergonomic-Related Products)
December 1, 2006... The Lift & Rotate air-operated lift system features a low profile of just 6.5 inches. Rotation is manual and can be locked into any position with an air brake. The standard model travels 25 inches, but users may specify a custom model that can...

Work positioner available with platform or forks.(Ergonomic-Related Products)
December 1, 2006... A compact design distributes a load evenly over four oversized casters on the Lift Stik lifter/transporter. The mechanical lift is powered by continuous chain in a single, narrow mast for greater visibility. A handheld remote allows the...

Custom configurable lift tables.(Ergonomic-Related Products)
December 1, 2006... Standard and custom Backsaver lift tables are available in more than a million configurations. Designed to improve productivity and worker safety in-machine feeding, work positioning, assembly, order picking, pallet loading and other...

Move and maneuver 2,000 pounds loads easily.(Ergonomic-Related Products)
December 1, 2006... The PST Plus flexible hand pallet truck handles loads to 2,200 pounds with easy maneuverability. The self-propelled truck is powered by an electric motor that is activated and deactivated via two push buttons on the handle. A compact design...

Overhead rails carry up to 2,000 pounds.(Ergonomic-Related Products)
December 1, 2006... Load bearing, lightweight aluminum rails offer easy installation and movement of loads overhead. Maximum load capacity is 2,000 pounds. Loads may be located directly under the system or cantilevered off to the side. Safety features include a...

Battery-powered convertible hand trucks.(Ergonomic-Related Products)
December 1, 2006... The CobraPro Junior and Senior convertible aluminum hand trucks are powered by a high-torque battery drive system powerful enough to climb standard truck ramps. Variable speed fingertip controls direct the trucks, while a variable throttle...

ProMat[R] 2007 show preview: an MHIA International Exposition.(Company overview)
December 1, 2006... ProMat 2007 will showcase from January 8-11 more than 750 exhibits of materials handling and supply chain solutions. This international event, held in Chicago's McCormick Place, will offer an array of hardware, software and services to help...

Sort 300 cartons per minute.(AUTOMATION UPDATE)
December 1, 2006... This S-L 300 sorts 300 cartons a minute using a new parallel divert technology that places the sort shoes parallel to the centerline of the sorter. This results in better package control, minimizing the chance a package will roll off the shoes...

Horizontal carousel stores large, heavy items.(AUTOMATION UPDATE)
December 1, 2006... The Intermat heavy-duty horizontal carousel stores large goods such as cylinders, beams, rolls, cable reels and tubes. Built to accommodate unique load and facility requirements, the carousel is available in a variety of models, including...

Counterbalanced clamp AGV lifts loads to 16 feet.(AUTOMATION UPDATE)
December 1, 2006... An automatic guided vehicle combines the chassis of a counter-balanced lift truck with a standard clamping mechanism to lift and move loads. Ideal for deep-lane stacking and crossdocking, the AGV stacks unitized loads to 16 feet without the aid...

High-speed sorter.(AUTOMATION UPDATE)
December 1, 2006... The ProSort 421 sorts products at a 22 degree angle where higher speeds are required and close divert centers are not so critical. It sorts products at a 30 degree angle where close divert centers are required. It comes in five overall widths...

High-speed crossbelt sorter.(AUTOMATION UPDATE)
December 1, 2006... The S-3000CB crossbelt sorter offers accurate, high-speed transportation and sortation of items that are fragile and hard-to-grip. The sorter can be customized to any facility size. Driven by individual, motorized belted carriers, the sorter...

Load trailers more efficiently.(AUTOMATION UPDATE)
December 1, 2006... An automated trailer loading system features automatic guided vehicles with forks. Designed to reduce labor costs and product damage, the system can operate 24/7. The vehicles pick up pallets directly from conveyors or at the end of palletizing...

Tow 4,000-pound loads.(AUTOMATION UPDATE)
December 1, 2006... The battery-powered, magnetic-tape guided SmartCart features a 4,000-pound towing capacity. Designed for manufacturing facilities, the automatic guided carts tows rather than carries loads. Available in three models, the carts can be used with...

Small footprint conveyor.(AUTOMATION UPDATE)
December 1, 2006... The Quickdraw conveyor system features a low-profile rail and requires a 50% smaller footprint than standard conveyors. Integrated sensors provide conveyor control within specific zones, while the system's controller is self-contained with...

Low-profile conveyor system for assembly lines.(AUTOMATION UPDATE)
December 1, 2006... Ideal for work-in-process assemblies, the non-sparking extruded aluminum Transept series conveyor features a shielded enclosure and low-profile, reconfigurable monorail cross-section. System path layouts include 90 and 180 degree turntables,...

Maximize storage density and inventory accessibility.(AUTOMATION UPDATE)
December 1, 2006... The Shuttle XP vertical lift module (VLM) features multiple-access pick windows on different levels to link work areas and help with material sharing in storage and retrieval operations. The VLM's pick windows can be moved, added and changed....

Store and retrieve small parts automatically.(AUTOMATION UPDATE)
December 1, 2006... The viaspeed mini-load storage and retrieval machine automatically stores, retrieves and transports totes, trays and cartons of small parts. The system stores items up to four deep on both sides of a narrow aisle in varying length rack...

Strong, lightweight dock boards.(REAL SIMPLE SOLUTIONS)
December 1, 2006... Dock boards are constructed of aluminum tread plate that is strong and lightweight. Welded aluminum locking legs ensure stability and comply with OSHA guidelines. Formed curbs measure 3 x 3 inches. The dock boards have capacities of 5,000;...

Protective packaging minimizes shipping and storage damage.(REAL SIMPLE SOLUTIONS)
December 1, 2006... Offering longer-term shelf life and protection during shipment against corrosion, static electricity and airborne contaminants, barrier packaging seals products within flexible materials. The packaging materials are available with varying...

Work benches handle loads to 10,000 pounds.(REAL SIMPLE SOLUTIONS)
December 1, 2006... With 10,000-pound stop surface weight bearing capacity, extra heavy duty work benches are available in three sizes: 30 x 48 inches; 36 x 60 inches; and 36 x 72 inches. All models are 34 inches high. Heavy-duty construction includes a 3/16 inch...

Move heavy loads with hand truck.(REAL SIMPLE SOLUTIONS)
December 1, 2006... The PST 5000 hand pallet truck is designed with power start technology. Featuring a power transfer from the handle to the steering wheel, the truck helps operators overcome the forces of inertia. Lifting or lowering the truck's handle causes...

Hand truck converts to four-wheel cart.(REAL SIMPLE SOLUTIONS)
December 1, 2006... With a quick release, this convertible aluminum hand truck folds down from an upright to a horizontal position, easily converting from a two-wheel hand truck to a four-wheel cart. Gillis, 877-445-5471, www.gillisindustries.com. Write in 240....

Flexible storage solution.(REAL SIMPLE SOLUTIONS)
December 1, 2006... With 2,000 standard sizes and the ability to fit in standard shelving, carousels and flow rack, containers with hopper fronts provide flexible storage solutions. The containers are available in 10 colors and have capacities ranging from 25 to...