Medical Design Technology articles from November 2004

Medical Design Technology archives from November 2004

Power supplies.(Innovations)
November 1, 2004... Company offers multi-output versions of the ECM40 and ECM60 families of 40W and 60W AC/DC switching power supplies. Approved for Class I and Class II applications, both families have products with up to 3 outputs at voltages from 3.3 Vdc to 48...

5-/6-axis vertical robots.(Innovations)
November 1, 2004... The VP series of five and six axis robots are available with a 3 kg payload and a 430 mm reach, making them ideal for light assembly or laboratory use. With a speed of 3900 mm per second and a repeatability of [+ or -] 0.02 mm, these robots are...

CCD camera.(Innovations)
November 1, 2004... This CCD camera offers high image quality, standard interfaces, and multi-purpose functionality that meets a variety of OEM biotechnology applications. The MultiBlue Biotech CCD camera. with its plug-and-play USB 2.0 interface, joins the...

Electric injection molding machine.(Innovations)
November 1, 2004... The MEII series electric injection molding machine instantly reaches maximum injection speeds to accurately mold thin-wall and fine-precision parts. A belt-less electric injection drive servometer is behind the excellent performance of the MEII...

Foams.(MDT Exclusive)
November 1, 2004... This family of foams is designed for medical skin contact applications. The foams are specially formulated from the PORON, BISCO, and Polyolefin lines, and are uniquely designed to meet internationally recognized skin contact ratings. They can...

Cyanoacrylate adhesives.(Innovations)
November 1, 2004... Loctite Prism 4500 series next generation cyanoacrylate adhesives offer exceptionally fast cure speeds. Also, over the product's 21 month shelf life, cure speed will not degenerate measurably. The adhesives are less responsive to environmental...

Quality standards should precede competitive bidding, says panel.(Regulatory Report)
November 1, 2004... According to The Gray Sheet, DME supplier quality standards to guide competitive bidding should be adapted from accrediting bodies rather than developed by CMS. This was the recommendation made by members of the Program Oversight and Advisory...

VAD manufacturers advised to think small and simple.(Regulatory Report)
November 1, 2004... The Gray Sheet reports that surgeons at the TCT conference in Washington, D.C., said the ventricular assist device market will expand only if manufacturers appeal to general cardiologists with simpler, less invasive systems. According to...

Quality assurance advice given.(Noted ...)
November 1, 2004... Controlling the quality of supplied parts and materials can be a daunting task for device manufacturers. particularly when dealing with numerous contractors and components. industry consultants recommend a risk-based approach to managing...

Zenith Flex AAA device approved.(Noted ...)
November 1, 2004... The Gray Sheet reports that FDA has granted Cook permission to market a next-generation abdominal aortic aneurysm endovascular graft, along with the H&L-B One Shot delivery system. Zenith Flex offers physicians a "minimally invasive way to...

CAD fetal monitor panel nixed.(Noted ...)
November 1, 2004... FDA is determining whether general guidance should be developed for CAD fetal monitors after canceling the October 25 Obstetrics & Gynecology Devices Panel meeting, according to CDRH staff. The Gray Sheet reports the panel was slated to discuss...

Valve maker states position.(Noted ...)
November 1, 2004... According to The Gray Sheet, heart valve maker Edwards Lifesciences reveals that its purchase of percutaneous mitral valve repair technology from ev3 for $15 million, coupled with previously acquired technology, gives the firm "the earliest and...

An interview with Bruce Barclay, president and COO, SurModics: this month's 'View From The Top' examines the changes taking place in today's coating industry. It offers a unique perspective from a leading provider of surface modification and drug delivery solutions to the medical device industry.(View From The Top)
November 1, 2004... As he approaches the anniversary of his first year with SurModics as president and COO, Bruce Barclay can celebrate a much longer, distinguished career within the medical device manufacturing marketplace. Serving in key roles with Guidant and...

Selecting motors for multileaf collimators: engineers needed motors with excellent packaging options and the high torque and speed necessary to make programmed shape changes quickly and precisely. Here's a look at how they found the precision they required to deliver radiation therapy.(Material & Component Review)
November 1, 2004... Before the introduction of computerized radiation machines, head and neck tumors could not be safely treated with radiation without the possibility of damaging organs, the spinal cord, or salivary glands. Some patients faced possible paralysis...

Vapore and PARI partner to develop medical device.(Industry Watch)
November 1, 2004... A respiratory care medical device using a new vaporization technology from Vapore Inc., Richmond, CA, is in development at PARI Respiratory Equipment Inc., a manufacturer of aerosol delivery devices for patients with respiratory diseases....

Patents received.(Industry Watch)
November 1, 2004... The U.S. Patent and Trademark Office has issued Synovis Life Technologies Inc., St. Paul, MN, two patents--one for a steerable styler delivery system and another for an adjustable stiffness styler delivery system. The first allows the distal...

AVX receives award.(Industry Watch)
November 1, 2004... AVX Corp.'s Tantalum Division has received Medtronic's supplier excellence award. The company was the only firm to receive the award this year. The award recognizes outstanding supplier relationships with recipients providing a quality product,...

Firerod marks 50.(Industry Watch)
November 1, 2004... Watlow's Firerod heater is marking 50 years of service in the heating element market. Introduced and patented in 1954 as the first swaged cartridge heater, it continues to be used in a diverse number of applications including kidney dialysis...

At DDL West.(People News)
November 1, 2004... DDL Testing Services, a MN-based package, product, and material testing laboratory, has expanded its Costa Mesa, CA, facility with the addition of a new package engineer. Michael Foster has joined DDL West from Geami Ltd.

At Feinfocus.(People News)
November 1, 2004... Feinfocus, a manufacturer of X-ray inspection systems and tubes, has appointed Dr. Frank Gitmans as managing director of the company's global headquarters in Germany. Previously, Dr. Gitmans had been managing director for Peter Wolters Surface...

Calendar of events.(Industry Watch)(Calendar)
November 1, 2004... Click on the "Calendar" link at www.dtmag.com for information about any of the following events. November 14-16: Medical Device R&D Summit, Hyan Chesapeake Bay Resort, Cambridge, MD. November 23-24: Six Sigma for Pharmaceutical,...

Developing a strategy for global development teams: a versatile regulatory compliance strategy is crucial to tapping into the expertise of global product development teams. This article outlines four steps to achieving a successful solution.(Emphasis On Regulatory Compliance)
November 1, 2004... Maintaining regulatory compliance in an ever-evolving medical industry can challenge even the most experienced of medical manufacturers. Within the last decade, advances in travel and technology have provided greater access to global markets...

Fotofab: innovative solutions-exceptional capabilities.(2004 Solutions In Medical Manufacturing)(Advertisement)
November 1, 2004... Solution: Shrinking the Engineering Design & Cost Envelope with Photochemical Machining It's to any medical device designers' advantage to explore the benefits photochemical machining (PCM) can bring to metal parts fabrication. Reviewing...

Embedded communications processor at core of videophone's success.(Case In Point)
November 1, 2004... The Project: To develop an interactive videophone with a digital stethoscope and support for various medical peripherals. The Solution: Use a highly integrated embedded processor that handles numerous communications protocols and minimizes...

Peristaltic pump family from Rietschle Thomas meets industrial, commercial and medical OEM needs.(2004 Solutions In Medical Manufacturing)(Advertisement)
November 1, 2004... The Rietschle Themes line of high-performance SR Series peristaltic pumps has been specially engineered to provide maintenance-free transport of corrosive, abrasive and sterile solutions in a wide variety of applications. Because the moving...

New horizon pump from Rietschle Thomas perfect for portable oxygen concentrators.(2004 Solutions In Medical Manufacturing)(Advertisement)
November 1, 2004... Just introduced by Rietschle Thomas, the Horizon Model 2250 pressure/vacuum pump provides unprecedented levels of mobility and efficiency when used in portable oxygen concentrators.

MicroMo Electronics, Inc.(2004 Solutions In Medical Manufacturing)(Advertisement)
November 1, 2004... MicroMo Electronics, Inc. 14881 Evergreen Avenue Clearwater, FL 33762-3008 Tel: (727) 572-0131 Fax: (727) 573-5918 Toll Free: (800) 807-9166 e-mail: info@micromo.com Web: www.micromo.com MicroMo Electronics,...

Fluid control valve.(Pumps & Valves)
November 1, 2004... The Herion 97100 directional control air valve represents a cost effective solution for today's automated process industries. The 97100 series is compact in design and suitable for applications requiring high flow rates. Featuring a mechanical...

Exhaust valve.(Pumps & Valves)
November 1, 2004... The J-Series exhaust valve offers fast response time and high flow rates with its 1/8 in. and 1/4 in. ports. The all brass construction and 100% testing assures the highest level of quality. Although the primary function of this valve is to...

Solenoid valves.(Pumps & Valves)
November 1, 2004... The 300 Series direct-acting solenoid valves offer a wide range of options for broad design flexibility and maximum performance. The 300 Series are multipurpose 3-way valves with direct-acting solenoids. The 310 is 19 mm wide with a 0.14...

Metering pumps.(Pumps & Valves)
November 1, 2004... The H25 metering series are hydraulically balanced diaphragm pumps. They are engineered to pump some of the toughest solutions imaginable at up to 1200 gpm, while providing [+ or -] 1% steady state accuracy with a 10:1 turndown ratio, at a...

Piston pumps.(Pumps & Valves)
November 1, 2004... Series 2770 WOB-L piston pumps offer long life, clean air flow, and field serviceability, making them excellent choices for a variety of medical, dental, and other OEM applications. Constructed of light yet rugged die cast aluminum, 2770 Series...

Piston metering pumps.(Pumps & Valves)
November 1, 2004... Valveless Piston Metering Pumps provide precision fluid control for environmental monitoring, sampling, and treatment applications. The low current DC motor is ideal for extended 12/24 volt battery operation in remote locations. The unique...

Leaning into Six Sigma: integrating Lean Six Sigma and a manufacturing execution system can help meet regulatory compliance goals. This exclusive report shows how such integration can increase return on investment without compromising quality or efficiency.(Cover Story)
November 1, 2004... Lean Six Sigma, the union of lean manufacturing and Six Sigma, has provided manufacturers with an unprecedented tool for generating the lowest cost, highest quality product on time. Lean Six Sigma's potential has not been realized in the life...

Machine vision.(New Products)
November 1, 2004... iNspect is a part of the company's line of easy-to-use, pre-packaged vision appliances for industrial end users. Designed for applications that require multiple inspections based on independent views of the same part, iNspect provides a...

Adhesive tapes.(New Products)
November 1, 2004... The 3189 Series and 3474 Series are two lines of double coated adhesive tapes that bond well to a variety of substrates, most notably ether foam. They are designed to bond to dissimilar materials. Both series provide a pressure-sensitive...

Infrared thermometer.(New Products)
November 1, 2004... The ThermoTrace Infrared Thermometer, Model 15030 has been re-engineered for improved accuracy, While similar competitive products list specifications of [+ or -]2[degrees]F accuracy on a single degree point of 73[degrees]F, this unit's...

Rotary encoder.(New Products)
November 1, 2004... The Model A37 mini encoder is a 12-bit single-turn absolute rotary encoder with opto-electronic technology. These encoders are used in a wide variety of position-sensing applications for the measuring of angles and distances in relatively small...

Filter potting/sealing.(New Products)
November 1, 2004... The "Decker DL" with C-530 continuous path motion platform is used in the potting of HEPA and other type filter assemblies. * Continuous flow rotary pumps * Variable ratio * Touch panel operator interface * Paradyne...

Wire stripper.(New Products)
November 1, 2004... The E300 heavy duty wire stripper is ideal for demanding applications and production line stripping of large magnet, enamel, and film insulated wires. It can process a wide variety of material types including varnish, enamel, polyester, glass,...

Gorman Rupp Industries.(2004 Solutions In Medical Manufacturing)(Advertisement)
November 1, 2004... Gorman-Rupp Industries is a manufacturer of high quality pumps for use in global OEM medical applications. Our reputation and success have been built on innovative designs, customer service and providing products to meet the exact...

Miniature clamps.(New Products)
November 1, 2004... These clamps and rings are designed lot medical applications. They are designed for outside diameters as small as 2.5 mm to assure leak-free sealing and fastening solutions. The clamps are suitable for hose supply lines with chemicals, ink,...

OEM lasers.(New Products)
November 1, 2004... Low-power C[O.sub.2] lasers feature excellent beam quality and a very small footprint. Called the Diamond C-55 and Diamond C-70, the OEM lasers provide more than 55W and 70W of output power, respectively, at 10.55- to 10.63-[micro]m. Their...

Video inspection fiberscope.(New Products)
November 1, 2004... SpecVision ILS is designed with ultra-long working distance optics for various applications that require demanding visual inspection. Utilizing interchangeable adapters, the hand-held ILS can view connectors residing in bulkheads and polishing...

Stepper motors.(New Products)
November 1, 2004... The MAE "S Series" hybrid stepper motors are optimized for maximum torque to promote smooth operation. These motors add value with microstepping capabilities ideal for applications requiring fine positioning. They are offered in standard NEMA...

2004 Solutions in medical manufacturing.(Advertisement)
November 1, 2004... Allow me to take a moment of your time to highlight NSK America's products and describe how our products can help you improve your processes and productivity immediately and for very little cost. NSK is a specialty manufacturer of high-speed,...

HEPA/ULPA filters.(New Products)
November 1, 2004... Company manufactures both HEPA and ULPA filters for environments with the most stringent air purity requirements, including health care, pharmaceutical, laboratory, and others. Microguard 99 filters are available in 99.97%, 99.99%, and 99.999%...

Chillers.(New Products)
November 1, 2004... This line of Iceman Central Chillers is designed to provide efficient and reliable centralized cooling. These all-cooled or water-cooled units, with capacities from 30 to 80 tons, feature both single and multiple-circuit designs. They provide...

Epoxy.(New Products)
November 1, 2004... This high performance, two component epoxy adhesive/sealant, called EP34AN, features a thermal conductivity of 22-24 BTU/in/[ft.sup.2]/hr/[degrees]F. Physical properties are maintained even after long exposures to temperatures in the 400 to...

Power supplies.(New Products)
November 1, 2004... Company introduces 28 open frame and external medical power supplies. They deliver up to 65 Watts of DC power, in both open flame and external configurations, with all medical agency and regulatory approvals completed Custom models deliver up...

Converters.(New Products)
November 1, 2004... Seeking to reduce power consumption, circuit board space, and overall system cost while simultaneously increasing performance, the nanoDAC family of digital to-analog converters (DACs) come in tiny packaging with nine new offerings that are...

Monomers/polymers.(New Products)
November 1, 2004... Medical device manufacturers can use these specialty monomers and polymers to "dial in" specific product attributes such as hardness, water permeability, biodegradability, and UV light absorbency. The company develops specialty monomers and...

Cordsets.(New Products)
November 1, 2004... UK/Ireland cordsets are for equipment rated from 5 to 13 amps with service at 250 VAC. They are ASTA approved and available with a 5, 10, or 13 amp BS 1362 fuse. The cordsets are available with 0.75. 1.0, or 1.5 mm HAR cable in stock lengths of...

Three axis controllers.(New Products)
November 1, 2004... The TMCM-303 and TMCM-310 Three Axis Controllers provide a complete motion control system at a low cost and are conveniently compact in size. The 303 is a 1-3 axis stepper controller that has an ouput current of up to 1.5 Amps/phase and is...

Position sensor.(New Products)
November 1, 2004... The R-Series is a digitally based "smart" sensor featuring enhanced output capabilities and improved sensing performance and accuracy. It also includes the diagnostic LEDs and external programming capabilities standard in the new product...

Keylock switches.(New Products)
November 1, 2004... JD Series keylock switches have a maximum current rating with resistive load of 4 amps at 125 VAC or 2 amps at 250 VAC. Expected life is 6,000 cycles at full load. Material specifications include a nickel plated zinc alloy lock, two standard...

Watlow, St. Louis, MO, is making a configurator edition of its popular human-machine interface software available at www.watlow.com for free download and unlimited use.(Free Software)
November 1, 2004... * Watlow, St. Louis, MO, is making a configurator edition of its popular human-machine interface software available at www.watlow.com for free download and unlimited use. The PC-based software, called Watview, allows users to setup and monitor...

Saelig Co. Inc., Pittsford, NY, is offering a 30-day full-version trial of its SFG software.(Free Software)
November 1, 2004... * Saelig Co. Inc., Pittsford, NY, is offering a 30-day full-version trial of its SFG software. After the free trial, the audio function generator software is available for $25. SFG is a Windows program that implements a flexible function...

Galil Motion Control, Rocklin, CA, is providing readers with a free toolkit of motion control solutions called MotionCode.(Free Software)
November 1, 2004... * Galil Motion Control, Rocklin, CA, is providing readers with a free toolkit of motion control solutions called MotionCode. Its step-by-step procedures guide engineers in the development of motion applications. It can be accessed by registered...

A new product bulletin from PennEngineering Fastening Technologies.(Instructive Design Guides)
November 1, 2004... * A new product bulletin from PennEngineering Fastening Technologies, Danboro, PA, examines fasteners designed to satisfy component-to-board, board-to-board, and board-to-chassis production-fastening needs. "Bulletin K" can be downloaded free...

A new handbook from GLS Corp., McHenry, IL, explains how to optimize adhesion in hard-soft overmolding.(Instructive Design Guides)
November 1, 2004... * A new handbook from GLS Corp., McHenry, IL, explains how to optimize adhesion in hard-soft overmolding. It details the benefits of soft-touch overmolding materials and provides tips on obtaining the best adhesion between hard substrates and...

Representing 1,800 companies, the National Tooling and Machining Association has formed a strategic partnership with SourceHorizon Inc., which matches buyers and suppliers of custom made-to-order parts.(New Online Marketplace)
November 1, 2004... Representing 1,800 companies, the National Tooling and Machining Association has formed a strategic partnership with SourceHorizon Inc., which matches buyers and suppliers of custom made-to-order parts. The result is an online marketplace where...

New set of SOPs.(Engineer's Toolkit)
November 1, 2004... The Thomson Center for Clinical Research Practice, Wellesley MA, has published "Standard Operating Procedures for Good Clinical Practice by Sponsors of Medical Device Research." These SOPs address the unique regulatory and business environment...