Industrial Heating articles from September 2002

Industrial Heating archives from September 2002

IH develops economic indicators for the thermal processing industry. (Editorial).(Industrial Heating)(Brief Article)(Statistical Data Included)
September 1, 2002... The desire to know the economic ups and downs of the thermal processing industry has existed for years. For the 70+ years that Industrial Heating has been reporting on the thermal processing industry, there has not been an industry-specific...

Truth in Government. (Federal Triangle).(bureaucracy and freedom)(Brief Article)
September 1, 2002... As Dr. Charlotte Twight explains in laborious detail in "Dependent On D.C.," America is in a crisis that most of the public does not comprehend. A reason is that most citizens have not read history, especially as written by Alexis deToqueville...

Membrane R&D for gas separation. (Trends).(coal gas)(Brief Article)(Statistical Data Included)
September 1, 2002... One of the U.S. Department of Energy, Office of Fossil Energy (FE) Vision 21 goals is the development of efficient gas separation to support gasification-based systems to achieve power using coal with near-zero emissions, coupled with...

New Source Review considered old hat. (Environmental and Safety Issues).(air pollution laws)(Brief Article)
September 1, 2002... EPA made a major announcement on June 13, 2002 that the broad-based New Source Review (NSR) program, intended to encourage emission reductions from major new sources of air pollution, will be abandoned and replaced with a new program designed...

BeaverMatic Inc.: quality, integrity and responsibility. (MTI Profiles).(Brief Article)
September 1, 2002... Midwest Industrial Contractors Inc., the forerunner of BeaverMatic Inc., Rockford, Ill., was established by innovative thermal processing equipment design engineer, Mark C. Peterson, in 1980. Initially focusing on rebuilding, renovating and...

Honeywell: the easy choice[TM]. (IHEA Profiles).(Brief Article)
September 1, 2002... Honeywell can trace its roots back to 1885, when an inventor named Albert Butz patented the furnace regulator and alarm. He formed the Butz Thermo-Electric Regulator Co., Minneapolis, on April 23, 1886, and a few weeks later invented a simple,...

Material Solutions Conference and show. (Technical Conference).
September 1, 2002... Columbus Convention Center, Columbus, Ohio 7-10 October 2002 Find ways to increase production, improve quality and decrease costs through metals and materials technology at the ASM Materials Solutions Conference and Exposition, 7-10 October...

Walking-beam furnace order received. (New Facilities and Technology).
September 1, 2002... Techint Technologies, Pittsburgh, Pa., has been awarded a contract from North American Stainless to design and supply a walking beam furnace and a rotary hearth furnace, complete with a quench system. The furnaces will be installed at the North...

Pulsed plasma ion nitride furnace delivered. (New Facilities and Technology).
September 1, 2002... PlaTeG USA, Meadville, Pa., delivered a pulsed plasma ion nitride furnace to A&M Heat Treatments in Mississauga, Canada, for its newly formed Surface Treatment Division. The furnace will be used for the surface treatment of tooling pressed...

Automated aluminum wheel line installed. (New Facilities and Technology).
September 1, 2002... Feco/Moco (a Park-Ohio Co.), Cleveland, Ohio, installed an automated aluminum wheel line at HayesLemmerz, Gainesville, Ga. The system is designed to process 150 wheels per hour using a short cycle heat-treating concept. The system includes a...

Driveline system designed for hybrid vehicle. (New Facilities and Technology).
September 1, 2002... American Axle & Manufacturing (AAM) Holdings Inc., Detroit, Mich., joined Ford Motor Co. and three other automotive suppliers in the development of a prototype hybrid bus for airport shuttle and mass transit use. AAM designed and integrated...

Heat treating cell order awarded. (New Facilities and Technology).
September 1, 2002... Ipsen International, Cherry Valley, Ill., has been awarded an order for design, development and manufacture of an automated heat-treating facility from Milwaukee Electric Tool Corp., Brookfield, Wis. To support the growing requirements of...

California service office opened. (New Facilities and Technology).
September 1, 2002... Vacuum Furnace Systems (VFS) Corp., Souderton, Pa., opened a sales and service office in the Los Angeles, Calif., area to provide sales, service and support for existing and prospective VFS customers in the western U.S. Currently capable of...

Quench furnace ordered. (New Facilities and Technology).
September 1, 2002... The Euclid Heat Treating Co., Cleveland, Ohio, ordered an intensive quench/internal quench furnace from A.F.C. Holcroft Furnace Co. of Wixom, Mich. A building addition of 7,600 [ft.sup.2] (700 [m.sup.2]) is being constructed to accommodate the...

Walking-beam furnace order received. (New Facilities and Technology).
September 1, 2002... Bricmont Inc., Canonsburg, Pa., received a multimillion-dollar contract from Chaparral Steel to supply and install a new walking beam furnace for its Midsection in Midlothian, Tex. In addition to the furnace, the supply includes all charging...

Slab-reheating furnace system supplied. (New Facilities and Technology).
September 1, 2002... C.S. Aluminum Corp. selected Seco/Warwick Corp., Meadville, Pa., as its supplier for a pusher type aluminum slab-reheating furnace for a plant expansion in Kaohsuing, Taiwan R.O.C. The complete project consists of turnkey installation of a...

Kolsterising' service center opened. (New Facilities and Technology).
September 1, 2002... Bodycote Thermal Processing opened a North American service center for Kolsterising[R], its proprietary case-hardening process for austenitic stainless steel, in Boaz, Ala. The treatment previously was only available from Bodycote's facility in...

Quench-test equipment supplied. (New Facilities and Technology).
September 1, 2002... Statoil Lubricants in Nynashamn, has taken delivery of the ivf quenchotest, the testing set developed by IVF, Molndal, Sweden, for quenching oils and other quenchants. Statoil will use the equipment in the development of new quenching oils, as...

Nitriding furnace installed. (New Facilities and Technology).
September 1, 2002... Eltro Services Inc., Oxford, Mich., completed the installation of an Eltropuls nitriding furnace in its facility. The furnace has an internal working area of 24 in. diameter and 72 in. high (609 and 1,830 mm). Eltro plans to use the furnace to...

Solution furnace installed. (New Facilities and Technology).
September 1, 2002... Modern Metal Processing, Williamston, Mich., manufactured and installed a 14 ft by 7 ft (4 by 2 m) deep solution furnace with both dip and spray quench capabilities in its facility. The furnace is mainly used for solution heat treatment of...

Digital imaging capability added. (New Facilities and Technology).(Brief Article)
September 1, 2002... Scot Forge added a new digital image analysis and archiving system in its metallurgical test laboratory at its Spring Grove, Ill., location. The system enhances the company's analytical testing services by creating a system for long-term...

Solar Atmospheres receives Boeing approval. (Organizational Developments).
September 1, 2002... Solar Atmospheres of Western Pennsylvania, Hermitage, Pa., earned Boeing approval for heat treatment. The facility is now able to perform a variety of vacuum thermal treatments of certain Boeing materials. The approvals include the following...

LOI merges with LVE. (Organizational Development).(LVE Verfahrenselektronik GmbH; LOT Thermprocess GmbH)
September 1, 2002... LVE Verfahrenselektronik GmbH has been integrated into its parent company, LOT Thermprocess GmbH, Essen, Germany. As a result of the merger, the entire range of industrial furnace know-how has been focused into one company. The business areas...

TRENT celebrates 75 years. (Organizational Development).
September 1, 2002... TRENT Inc., Philadelphia, Pa., celebrates its 75th anniversary this year. On July 27, 1927, the company, founded by Harold E. Trent, was incorporated as a manufacturer of electrically heated industrial process equipment and heating elements....

Despatch combines with Ransco Industries. (Organizational Development).(Brief Article)
September 1, 2002... Despatch Industries, Minneapolis, Minn., has combined with Ransco Industries, a designer and manufacturer of environmental test and simulation equipment in Oxnard, Calif. Production and distribution of Ransco products has already begun in the...

Reliance Steel & Aluminum to acquire two businesses. (Organizational Development).(Brief Article)
September 1, 2002... Reliance Steel & Aluminum Co., Los Angeles, Calif., signed agreements to acquire from Metals USA, Inc. the assets of two of its businesses. The first, Metals USA Specialty Metals Northwest, Inc., is based in Portland, Ore., with additional...

Dofasco to acquire Ohio automotive tubular assets. (Organizational Developments).(Dofasco Inc. acquires facility from LTV Corp., Copperweld Corp.)(Brief Article)
September 1, 2002... Dofasco Inc., Hamilton, Ontario, Canada, signed a letter of intent to acquire an advanced automotive tubular manufacturing and processing facility located in Marion, Ohio. Dofasco will acquire the assets, formerly operated by LTV/Copperweld,...

Alcoa to acquire Fairchild Fasteners. (Organizational Developments).(Fairchild Corp. selling fastener company to Alcoa Inc.)(Brief Article)
September 1, 2002... Alcoa Inc., Pittsburgh, Pa., agreed to acquire the assets of Fairchild Fasteners from the Fairchild Corporation for $657 million in cash. Fairchild Fasteners manufactures precision fastening systems and components for use in the construction...

NSL earns certification. (Organizational Developments).(NSL Analytical Services Inc. receives ISO/IEC 17025 accreditation)(Brief Article)
September 1, 2002... NSL Analytical Services Inc., Cleveland, Ohio, received accreditation for ISO/IEC 17025. The Performance Review Institute (PRI) conducted the audit. Operational guidelines examined during the audit covered 25 different areas of laboratory...

AC Technology acquires Servo drive company. (Organizational Developments).(Advanced Digital Inc.)(Brief Article)
September 1, 2002... AC Technology Corp., Uxbridge, Mass., a member of the Hamlin, Germany-based Lenze Group, acquired Advanced Digital Inc., a manufacturer of servo drives located in Camarillo, Calif. Advanced Digital's Simple-Servo products are high-volume,...

Boyle receives registration. (Organizational Developments).(Boyle Inc. receives ISO 9002: 1994-ANSI/ASQC Q9002-1994 registration)(Brief Article)
September 1, 2002... Boyle Inc., Freeport, Pa., achieved the ISO 9002: 1994-ANSI/ASQC Q9002-1994 registration through SRI Quality System Registrar Inc., Wexford, Pa. Boyle manufactures replacement parts and complete dies for metal stamping.

Preco acquires Laser Machining. (Organizational Developments).(Preco Industries Inc., Laser Machining Inc.)(Brief Article)
September 1, 2002... Preco Industries, Lenexa, Kan., acquired Laser Machining Inc. (LMI), a manufacturer/integrator of high-power laser systems for the metals, nonmetals and converting markets based in Somerset, Wis. LMI, now designated as Preco Laser Sysems, will...

GKN completes Indian acquisition. (Organizational Developments).(GKN Sinter Metals acquires Mahindra Sintered Products Ltd.)(Brief Article)
September 1, 2002... GKN Sinter Metals completed its acquisition of the remaining 51% of the issued share capital of Mahindra Sintered Products Ltd. in India from its joint venture partner, Mahindra and Mahindra Ltd. Mahindra Sintered Products manufactures sintered...

Rolled Alloys successfully audited. (Organizational Developments).(Rolled Alloys Inc. achieves ISO 9000:2000, AS 9100 standards)(Brief Article)
September 1, 2002... All four of the U.S. locations of Rolled Alloys, Temperance, Mich., have been successfully audited to the new standards of ISO 9000:2000 and AS 9100. Revision to the Rolled Alloys' QA System incorporate the requirements of these new standards...

AISI partners with LineBuilders to provide communication system. (Association News).(American Iron and Steel Institute)(Brief Article)
September 1, 2002... The American Iron and Steel Institute (AISI), Washington, D.C., and LineBuilders Inc., Seattle, Wash., have partnered to provide a new information and communication system for steelmakers and suppliers. The online service is a facility-oriented...

NACE releases corrosion study. (Association News).(NACE International)(Brief Article)(Statistical Data Included)
September 1, 2002... A recently released two-year study sponsored by NACE International, Houston, Tex., estimates the annual direct cost of corrosion in the U.S. to be $276 billion. The study also estimates that 25 to 30% of the total, or $70 to SO billion could be...

NCMS launches online training courses. (Association News).(National Center for Manufacturing Sciences )(Brief Article)
September 1, 2002... The Knowledge Solutions Division (KSD) of the National Center for Manufacturing Sciences (NCMS), Ann Arbor, Mich., launched a portfolio of more than 40 online classes for manufacturers with topics covering information assurance, quality and...

Calendar.
September 1, 2002... Conferences and Expositions OCTOBER 7-10 Material Solutions 2002, Columbus, Ohio, sponsored by ASM International. For more information contact ASM by phone: 800-336-5152; by fax: 440-338-4634; e-mail: Cust-Srv@asminternational.org; or...

Helium gas cooling offers cost benefits: While helium gas is more expensive than other quench gases used in vacuum heat treating, it offers benefits than can offset its higher cost. (Industrial Gases/Combustion).(Statistical Data Included)
September 1, 2002... Helium gas has been evaluated for use as a quench gas in vacuum heat treating in several studies over the years. For example, in the 1970s, Abar Corp. studied the effects of different cooling gases including helium at a specific pressure and...

Making a case for continuous furnaces. (Heat Treating).(Statistical Data Included)
September 1, 2002... A continuous furnace is ideal for processes requiring high production volumes, process consistency and precision control. This overview discusses some of the newer temperature and atmosphere capabilities of continuous furnaces and addresses the...

Improved refractories for IGCC power systems. (Ceramics & Refractories/Insulation).(integrated gasification combined cycle power systems)
September 1, 2002... Certain advantages make coal gasification a key element in the U.S. Department of Energy's Vision 21 power system. However, reliability and gasifier operation-economics issues need to be resolved before gasification will be widely adopted by...

Eddy-current testing makes in-line inspection easy. (Materials Characterization).(product testing)
September 1, 2002... Eddy-current testing can eliminate time-consuming destructive testing, reduce scrap and catch defects before they leave the production floor. Modern eddy-current instruments and probes allow manufacturers to perform 100% part hardness and...

Robotic testing systems handle high-volume tensile testing. (Materials Characterization).
September 1, 2002... Alcoa's Davenport (Iowa) Works laboratory is a showcase for advanced robotic testing technology, which speeds testing of samples from its many production lines, eliminating testing backlog, speeding up delivery time and reducing costs. The...

AEC Inc. (Show Stopper).(process cooling solutions)(Brief Article)
September 1, 2002... Process Cooling Solutions from AEC In many manufacturing industries, removing heat from a process is achieved by the continuous use of fresh water. Not only does this deplete our underground fresh water reserves, but it is also becoming...

Air Products & chemicals. (Show Stopper).
September 1, 2002... Providing solutions through technical service is a key part of our relationships with customers Air Products' application engineers use their vast experience to help customers meet the challenges they face. They provide a broad range...

BeaverMatic Inc. (Show Stopper).
September 1, 2002... Guard against equipment shutdown with reliable BeaverMatic replacement parts and components Look to BeaverMatic for customized service, including equipment upgrades and retrofits, safety inspections and tune-ups, as well as parts. The...

A.O. Smith. (Show Stopper).
September 1, 2002... Protective Coatings Division A.O. Smith's Ceram Guard is a series of water based coating systems formulated to retard oxidation and/or decarburization of steels, loss of alloying elements and absorption of gases by nonferrous alloys at...

Can-eng furnaces. (Show Stopper).
September 1, 2002... Simplified and efficient data acquisition, process control and material traceability--without runaway programming costs. Are the NEW Big 3 Quality Reporting requirements hogging you down? Can-Eng's Automation and Control Division offers its...

PROCEQ AG. (Show Stopper).
September 1, 2002... EQUOTIP[R] 2 - Portable Hardness Testers PROCEQ, the manufacturer of measuring instruments from Switzerland, offers a complete system for dynamic and static hardness testing of metallic materials. The protable hardness testers,...

Eclipse Inc. (Show Stopper).
September 1, 2002... High Efficiency Combustion Systems Thermal Solutions for Heat Treaters Eclipse offers high efficiency combustion equipment for all furnace and oven applications. The Therm-Thief burner/recuperator system, the AutoRecupe Ultra burner...

Flinn & Dreffein. (Show Stopper).(Brief Article)(Company Profile)
September 1, 2002... Flinn & Dreffein Engineering Company Over 90 Years of Custom Engineered Systems The Flinn & Dreffein Engineering Company, Northbrook, IL, is an independent engineering firm engaged exclusively in the design and construction of custom...

G-M Enterprises. (Show Stopper).(Brief Article)
September 1, 2002... G-M Enterprises G-M offers unique standard features on its vacuum-furnace equipment including patented heating-element support, patented gas distribution nozzle assemblies, trouble-free power feed-thru and many other exclusive features...

Applied Test Systems, Inc. (Show Stopper).
September 1, 2002... Quality systems for materials testing and process heating Since 1965, Applied Test Systems, Inc. (ATS) has focused on providing a line of materials-test equipment with an ever-evolving list of furnace and oven designs. ATS's furnace designs...

Karl Dungs, Inc. (Show Stopper).
September 1, 2002... Dungs has been developing and manufacturing high-quality components for gas safety and control systems for over 50 years. The American versions are tested and approved to UL, FM, AGA, CGA, and CSA. European designs are tested to EN, DIN, and...

C.I. Hayes...Solutions Driven. (Show Stopper).
September 1, 2002... C.I. Hayes provides cutting-edge heat-treating equipment and certified commercial heat-treating services, as well as enhanced equipment support, field service and preventative maintenance programs. Product line includes batch and continuous...

Heatbath/Park Metallurgical. (Show Stopper).
September 1, 2002... World Leader in Quench Technology Heatbath/Park Metallurgical quenchants deliver highest uniformity, are automotive-approved. Polyquench 15XN water-based polymer is not sticky and nitrite-free. AAA and No. 420 Quench Oils deliver maximum...

Honeywell. (Show Stopper).(Brief Article)
September 1, 2002... Honeywell is a US$24-billion diversified technology and manufacturing leader, serving customers worldwide with aerospace products and services; control technologies for buildings, homes and industry; automotive products; specialty chemicals;...

Carl Zeiss Inc. (Show Stopper).
September 1, 2002... Tools for Materials Applications Carl Zeiss offers a full line of upright, inverted, stereo and confocal microscopes, image analysis systems and digital cameras for all materials applications including research, metallurgy, surface...

The Drever Group. (Show Stopper).(Brief Article)
September 1, 2002... For over 60 years, The Drever Group has been dedicated to advancing the technology of heat-processing equipment. They offer a full-range of heat-treating furnaces, all adaptable to a customer's production requirements. The company also...

LECO Corporation. (Show Stopper).(Brief Article)
September 1, 2002... LECO has helped set the industry standard in the development and manufacture of innovative analytical instrumentation and metallographic equipment for more than 60 years. Products include large-section cut-off machines, sample-preparation...

Lydall Technical Papers. (Show Stopper).(Brief Article)
September 1, 2002... Refractory back up reduces heat loss up to 28% When considering typical refractory back up applications, choose the right design and thickness. Back-up insulation can reduce cold face temperatures up to 15%. Heat loss can be reduced as much...

Nuvonyx Inc. (Show Stopper).(Brief Article)
September 1, 2002... High-Power Direct Diode Lasers Nuvonyx Inc., a world leader in solid-state laser design and manufacturing, has the knowledge required to develop manufacturing processes that meet specific production needs. The company's expertise is...

Precision Quincy Corp. (Show Stopper).(Brief Article)
September 1, 2002... High-temperature walk-in ovens Four standard sizes of walk-in ovens offer work areas of 96, 162, 240 and 360 cu. ft. and maximum temperatures of 850[degrees]F (454[degrees]C), 1000[degrees]F (538[degrees]C) and 1250[degrees]F...

LOI. (Show Stopper).(Brief Article)
September 1, 2002... Aluminum Working under the slogan, "Furnaces and Services for Metals," the LOI-Group builds large scale furnace systems for the heat treatment, heating and smelting of metal materials for the global steel, light-metal and nonferrous metal...

Pfeiffer Vacuum Inc. (Show Stopper).(Brief Article)
September 1, 2002... PackageLine[TM]--Roots pumping package for the vacuum-furnace industry Pfeiffer Vacuum, with its range of advanced products, provides vacuum solutions for the vacuum-furnace industry. With that in mind, Pfeiffer Vacuum has developed...

Schunk-INEX Corp. (Show Stopper).
September 1, 2002... Composite Radiant Tubes Enhance the performance of your indirectly heated furnace! Composite radiant tubes, used worldwide since 1988, have superior resistance to creep, corrosion and thermal shock, reducing costly furnace downtime and...

Thermo Transfer Inc. (TTI). (Show Stopper).
September 1, 2002... Thermo Transfer presents the circular integral-quench furnace design, as well as completed projects in the areas of mesh-belt brazing, atmosphere tempering, roller hearths and atmosphere generators. TTI's capabilities include rebuild and repair...

Schwarzkopf Technologies Corp. (Show Stopper).
September 1, 2002... A Step Ahead in Technology Schwarzkopf presents Enerzone--the all-metal hot zone designed to reduce energy consumption up to 15 to 20% compared with conventional designs. Enerzone, featuring new Plansee high-emissivity black-body coating,...

Siemens. (Show Stopper).
September 1, 2002... Siemens Building Technologies, a worldwide leader in combustion controls, offers globally approved products specifically designed to optimize process performance, minimize costs and simplify installation. From gas valves and control motors to...

Surface Combustion, Inc. (Show Stopper).
September 1, 2002... Manufacturer of Industrial Heat Treating Equipment Surface Combustion combines extensive service and support with the most diverse product offering in the industry to provide its customers a highly qualified single source for solutions to...

Super Systems. (Show Stopper).
September 1, 2002... As seen at FNA 2002 in Las Vegas ... Used for troubleshooting and verifying heat treating atmospheres including: * Endothermic * Exothermic * Nitrogen/Methanol * Nitrogen-based PGA 3000 - 3-Gas NDIR Portable Analyzer...

Televac. (Show Stopper).
September 1, 2002... Remote Vacuum Measurement and Control Gauges. The new series of compact Televac remote vacuum gauges offer an ideal stand-alone measurement and control solution. These modules can provide local readout, relay control and analog output for...

Techint Technologies. (Show Stopper).
September 1, 2002... Techint Technologies Techint features a wide range of furnaces and atmosphere generators for heat-treating. Designs include batch and continuous roller-hearth furnaces; the STC short-time cycle furnace; 100% hydrogen furnaces (batch and...

Trent Inc. (Show Stopper).
September 1, 2002... Elements to Furnaces: A Diverse Line of Industrial Heating Equipment TRENT Inc. designs and manufactures industrial heating equipment for a diverse range of applications including glass, nuclear fuels, electronics, synthetic fibers,...

Unifrax. (Show Stopper).
September 1, 2002... Unifrax Corporation High Temperature Solutions For Global Markets Unifrax Corp. is a leading producer of high temperature fiber products with corporate headquarters in Niagara Falls, N.Y. They maintain manufacturing facilities in eight...

Tuthill vacuum systems. (Show Stopper).
September 1, 2002... Kinney features rotary piston vacuum pumps offering a triplex arrangement of rotary internals in a compact, quiet and Vibration-free design. Kinney also presents a dry running rotary screw vacuum pump. With no oil or water in the pumping...

WS Thermal Process Technology Inc. (Show Stopper).
September 1, 2002... Radiant Tube Burners WS presents its REKUMAT[R] C radiant tube burner, which uses components made of reaction-bonded silicon carbide (SiC), allowing operation at furnace temperatures to 2200[degrees]F (1205[degrees]C). WS radiant tube...

Zetec Inc. (Show Stopper).(Brief Article)
September 1, 2002... Zetec Inc. Zetec Inc. offers a full line of eddy current test equipment and systems for the verification of proper heat treatment conditions and case depth. For over 30 years, Zetec has led the industry with high-quality eddy current...

RFQ system. (Literature Showcase).
September 1, 2002... Heat Treat Quotemaster. HeatTreatQuotemaster is a dynamic new tool that facilities the entire sourcing process by automatically distributing quote requests to qualified heat treaters. With a few easy steps, heat treaters and buyers can...

Induction heat-treating services. (Literature Showcase).
September 1, 2002... TOCCO TOCCO operates multiple commercial heat treating plants throughout North America and Eruope to assure you maximum convenience and efficiency. These facilities have single shot and scan hardening machines for surface and through...

Induction heat-treating services. (Furnaces & Heat Treating Systems).
September 1, 2002... Zion Industries, Inc. Is an ISO 9002/QS9000 certified commercial induction heat treater with over 25 years of experience. Our employees provide hassle-free induction heat treating services from our plant in Valley City, OH, ph:...

Low Pressure Carburization system. (Furnaces & Heat Treating Systems).
September 1, 2002... Aichelin Heat Treatment Systems USA Aichelin's continuous Low Pressure Carburization system benefits include significant reductions in process gas usage, reduced energy consumption and soot formation, greater control of the quality process...

Custom furnaces. (Furnaces & Heat Treating Systems).
September 1, 2002... Applied Test Systems, Inc. Do you need custom designed furnaces to 1800[degrees]C? Since 1965, we have been manufacturing materials testing and process heating equipment. Special view ports, load train ports, mounting brackets, controls,...

Carbottom furnaces. (Furnaces & Heat Treating Systems).
September 1, 2002... Can-Eng Furnaces For nearly 40 years, Can-Eng has been designing and manufacturing heat treating equipment for industries including Aluminum, Automotive, Bar & Tube, Bearing, Commercial Heat Treat, Fastener, Forging, Foundry, Nonferrous,...